Eight Ball Deluxe
Bally, 1981You're currently viewing posts by Pinsider phillyfan64.
Click here to go back to viewing the entire thread.
Quoted from dmacy:Wanted to thank phillyfan64 for his huge help getting the parts order together for me and some details needed from when we did his. There's a hole we need to drill off of what CPR marks and some of the lighting sockets need to be the right height. He's been helping me get everything right.
Meanwhile, parts are being cleaned/tumbled...
You’re welcome. We’ll make you a Bally convert before it’s over haha.
I’ve used a little hot glue to hold everything together while trying to line them up. Even with that I still can’t get them perfect. It’s just the holes in the playfield don’t match the holes in the plastic perfectly. There’s always one or two that are slightly off.
Quoted from thierryv:Nice work , but do I notice yellow wires on the non banded side of the diode ???
That’s a great catch there. Probably a board saver.
You're currently viewing posts by Pinsider phillyfan64.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/ebd-84-cpr-playfield-swap?tu=phillyfan64 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Monroe Township, NJ