Documenting this really nice EBD 84 using a CPR playfield. It will be getting full torn down and rebuilt after cleaning. It already has new plastics and a lot of new parts that we will reuse. The plan is to replace any of the old coils with new as many are already new. Any mechs and flippers will be rebuilt. We will use new Titan_Pinball rings in white and some cool white Yoppsicles dyopp21 to finish it off. The GI is CW and will be reusing from ryanwanger Comet.

D57CDE51-98F4-4283-A7CE-41A19642579E (resized).jpeg

A706E069-99E5-462C-A900-DEB545B5FD33 (resized).jpeg

The playfield is for sale so reach out to Rick if you’re interested.

https://pinside.com/pinball/forum/topic/whats-fs-in-maryland-right-now-maryland-fs-thread/page/299#post-6751828

Some initial top side pics.

0475B06A-DF93-4A4D-A42D-BD96DFCC81F2 (resized).jpeg

05245597-3542-49DA-AC7F-CA321FA111E1 (resized).jpeg

33B1ABAD-9EDC-4595-A512-F1EFC4CFFEB5 (resized).jpeg

359B2A48-4E8B-4037-9B8D-C88100C2756B (resized).jpeg

60121F00-CF88-4331-A97A-B7AC6887786E (resized).jpeg

6B362577-1BDF-414F-B748-48771247DB56 (resized).jpeg

949F57D6-2DFF-46B2-A2EA-B5CF58EA1D1C (resized).jpeg

A544F8D5-D89D-4B37-8D68-B81012A39296 (resized).jpeg

AA60BE67-134C-4279-90A4-4D91C7616482 (resized).jpeg

B4600BE4-133E-42D4-B073-533D55AEDA10 (resized).jpeg

CE99406C-D595-45AA-9E8A-D90100309670 (resized).jpeg

D60C1EC7-51F1-4A9C-A992-E81EA5F89BD9 (resized).jpeg

FF12AE22-7253-4B3F-8F3E-69F65A122CA1 (resized).jpeg

Taking apart.

0475089B-FC9C-4551-8819-E0FF0716A7E3 (resized).jpeg

1B404AA9-620A-4377-B5F7-D1CC6902E865 (resized).jpeg

36FCE997-C02C-4464-8A6D-6CAF30CD0684 (resized).jpeg

3E0784CF-8E6A-46ED-BBC6-DB2341902DB1 (resized).jpeg

BFBF1129-FE4B-4D24-8380-7DEAED3AF94D (resized).jpeg

F880D874-417F-4652-A6C3-35A7CEE80914 (resized).jpeg

54E46264-37EC-492D-B8D3-1A1908E29D98 (resized).jpeg

17B728D2-6DAF-47B8-A3E9-2E5D46D23151 (resized).jpeg

F409BE0C-1A1C-4DCE-84E8-83186111347F (resized).jpeg

73298FFC-B3AC-4812-AE4E-2A439D6F5F32 (resized).jpeg

Bottom side:

0CCB921A-2301-4887-9EF8-3D83F89F9DD8 (resized).jpeg

11855D98-7BB6-43BC-9C21-782ACC09B6F1 (resized).jpeg

36D514C4-9147-47CF-BBE6-796FC14EF3FD (resized).jpeg

53994ECB-4FA2-4841-8093-0556D04E3457 (resized).jpeg

6699EE31-C066-420E-B765-3BDB43DE07EE (resized).jpeg

680E752A-19EB-4130-892C-4A7D6885F8F7 (resized).jpeg

72CE3A82-884D-4099-B1E6-B6F5AE012BAB (resized).jpeg

7D9A8028-9D93-4B1A-A76E-A36D2ACA0912 (resized).jpeg

B6283343-55DF-4C0E-BADD-4F23802B8BCC (resized).jpeg

DB89F6E2-F7E9-4E23-A6E2-4FA91395DF80 (resized).jpeg

E8A252C8-D6B9-4C2C-9C3B-63E6C722A0E0 (resized).jpeg

F9336A49-EEEE-4713-9F87-785091A7ACB8 (resized).jpeg

FC47AC69-43DC-4ACF-BB1D-D5254BB42BAC (resized).jpeg

Removing parts from the bottom.

4A2F4119-581D-4DF2-9BB6-68A8A7EB219E (resized).jpeg

5EBE715E-D172-4370-85D1-BA7736FAD1AD (resized).jpeg

6345D54B-5615-46F6-9E8C-287FB1FB9898 (resized).jpeg

65C30CD5-8EC2-4BAE-8D17-B0C4BD419237 (resized).jpeg

765D7A5E-7C29-4192-92EC-86E1FBD8BF92 (resized).jpeg

7C12EF72-8AA5-460E-9A0F-E83A99932778 (resized).jpeg

8AA80055-0E66-4DB4-93EF-4C94168196CF (resized).jpeg

8ADAD66F-613C-4592-B3B7-2797179A1196 (resized).jpeg

8BA87043-E4E1-47C7-BBEF-16A831B52809 (resized).jpeg

AE3BEEFD-A223-494F-BC51-95CC7CFD50C2 (resized).jpeg

B3CF6581-16F8-4DB8-BD7F-C32F117332A3 (resized).jpeg

Wanted to thank phillyfan64 for his huge help getting the parts order together for me and some details needed from when we did his. There's a hole we need to drill off of what CPR marks and some of the lighting sockets need to be the right height. He's been helping me get everything right.

Meanwhile, parts are being cleaned/tumbled...

Pop bumper mechs.

93F3C9FA-80E0-49FC-92CD-B03418D85E5B (resized).jpeg

89C8C8D8-9D57-4F38-A56C-87B5DC2AF3E9 (resized).jpeg

F4E9A295-A782-4F90-80C8-C2760AF2DD89 (resized).jpeg

27F3D322-0DFE-4C03-8D91-FBC960A9341E (resized).jpeg

8897040F-D4AF-452C-8665-06CA5862ABEB (resized).jpeg

Saucer eject and ball return mechs.

C12BB81A-96F3-4923-86BB-FC9545B56F87 (resized).jpeg

5B6304A6-2D15-45ED-8521-C44E527F376C (resized).jpeg

EF63125F-63C5-4FF5-8261-64C2553546C3 (resized).jpeg

78BF6AD4-B5B1-45F0-A51C-6A079D66E16B (resized).jpeg

B5037126-3497-4E9F-8A25-1A48FC54ADDA (resized).jpeg

Nope, I just tried everywhere today. I’m going to have to reuse these. Thankfully they’re decent.

Some more mechs about to be torn down for cleaning.

7B6A1DC1-E4C0-4F3A-B78C-52A27B959FDC (resized).jpeg

4FBCDA2A-E198-4773-ABED-4E5C28E61ED6 (resized).jpeg

761014B8-9C40-40E1-BB14-E4B4454CF9FB (resized).jpeg

FEA40283-C36E-4514-831E-BD9C609F7E62 (resized).jpeg

93A9FA56-3F2F-4145-A84A-6B5F27B54E56 (resized).jpeg

D5AE8F9B-516D-4C06-AB7E-29AB3F337ADF (resized).jpeg

6CCDBDB2-4A2F-45F0-9CAD-724977DEA77C (resized).jpeg

Some top and bottom sides getting parts.

1C78E8AC-5C2A-4943-AFB0-1D9D45D2C9CC (resized).jpeg

5A65D2CD-99CB-482E-9752-842CC9BC9DD5 (resized).jpeg

The supervisor doing what she does best.

7D908470-76E5-4302-9B72-C8C28F620D72 (resized).jpeg

Oh my yes! These Yoppsicles are great and clean things up too. But not having all those new lamp holders is so much nicer.

Bottom side is about ready with lighting.

DOH! Missed a section of ground braid so here it is done. I’m sure there’s more I’ll have to follow back with.

phillyfan64 was a huge help again with the lighting, heights and part numbers.

15FC3146-1B83-4B11-A786-34CE076CEA1E (resized).jpeg

5889E4A9-6C83-4817-986A-F9FFB29FF886 (resized).jpeg

Posts are about all in. This title, due to some errors in the holes (and with the rails stapled and not screwed), requires getting plastics in place or lined up.

The left rail needs the plastics in place so I can line it up and make holes to screw down.

and the one rear left plastic will need lined up to make the correct hole. More on that soon…

New Titan rings are now on.

57CCCCE4-E9C5-415F-B1A0-C6C29A85CD06 (resized).jpeg

849BBCCA-FB0F-46F0-983A-1167ECDD76DD (resized).jpeg

8C17170D-F07C-4F7F-A1CD-CA3DA4BA08CD (resized).jpeg

A4F59B9A-DC66-4800-8678-ECE59C493718 (resized).jpeg

EC4C5FF9-DB34-4A01-8318-D4D185567E3A (resized).jpeg

Here’s the post hole that’s way off as is. I followed the path I did with like on phillyfan64 where we used a T nut that I had to flush up to the playfield so the mech would sit. Originally it’s a screw stud, but since we are making a hole anyway, and it can take a beating, a through post makes more sense.

They’re out of order because when I sort them on whatever POS IOS beta I’m on crashes it.

D44BBAF5-95AF-4A43-B348-BFC6897847F9 (resized).jpeg

EDDBF831-3457-436E-9AAE-CD3671B7AAF3 (resized).jpeg

10988A28-F808-4B45-AC57-CD84CA9BBECD (resized).jpeg

5FAFEA7F-0144-492C-BC73-AD541D9F091E (resized).jpeg

4CCEE54E-13D7-44E7-9FC8-D8D02A62A54C (resized).jpeg

3B7C895B-7F2D-48C4-92F8-F1912A7D6C10 (resized).jpeg

E4051169-31EF-49CD-BAE6-21BBA0A37C5E (resized).jpeg

86069429-DDF6-47EB-8283-FDBC3BAE724B (resized).jpeg

049687EE-C31C-4327-8FB9-C0E0894FE1BB (resized).jpeg

More top side corrections. I have the left side rails back on. Set the plastics on the studs and then line things up.

As you can see the ball guide sticks out. I moved it back to match the plastic and made a new hole. The old hole is hidden. More gooder.

13C6987B-81FD-47B8-868E-B914F88FF250 (resized).jpeg

2D2D4A99-CBC4-49FB-AFF9-DCCE848B0FA9 (resized).jpeg

4A4C9FC7-D97E-473E-B47C-01846FE0E5BB (resized).jpeg

58C0111D-53B2-40AB-A174-360465682B54 (resized).jpeg

C4AD9352-A13D-413A-98C9-AFDC6D6ED20D (resized).jpeg

D5358994-2CC7-428E-B09A-801B010EABC0 (resized).jpeg

DC451FF4-9E3B-4E73-ACFE-595F5ECCC108 (resized).jpeg

I cursed a lot tonight. These bells and the stupid setup are a huge PITA. But the left side is done.

Earned this GM tonight.

4386300E-27DD-40FC-96C3-6E09BDB68AD0 (resized).jpeg

9B4FDB74-FA75-4FFD-9246-10BA0BEF8A2F (resized).jpeg

9F5A6CC2-A1BE-427F-87D7-B883A63CC009 (resized).jpeg

The supervisor is ready for treats…

So tonight is a wrap.

9E3BEC1B-689E-4295-B221-5869D1B04788 (resized).jpeg

You’re right. I tested with a flipper bat and no rubber! So back to adjusting the plastic with the original hole. This is one of the worst ones for anything lining up well I’ve done. They all need tweaks but damn.

It’s back and looks better now.

11E85C50-AB5D-4B43-B864-4397A8BBA653 (resized).jpeg

DCC72FBC-A924-45A4-99B1-C7A5A9F8C8FD (resized).jpeg

Thanks. I was wondering but just recycling what it came with.

Don’t tell them that lol! They’ll make me pay they to take it!

New bases for pop bumpers are really nice. Assembled them along with new wrappers, rebuild, and spoons.

Making some progress underneath. Many switches are lined up. They might as well left off the dimples as they’re in another galaxy. I’m lucky to find one hole line up on anything.

5E3FF651-D2F7-4199-9B57-5887262B0F34 (resized).jpeg

6E55A417-7AED-4653-9334-5F1BA5F090F5 (resized).jpeg

951DE46D-E2B0-4B47-8D0E-EBC45571D138 (resized).jpeg

98AC4DCA-32A0-4523-A2C6-E8B0DFA7A041 (resized).jpeg

A0C205B6-9ED3-448F-A4DF-62C9B10E1BFF (resized).jpeg

B1098EA7-0C3D-43F7-9600-4AD31DDF4B78 (resized).jpeg

The supervisor was busy tonight too.

52A538C7-A8AC-4D70-8690-09CE2D2024B0 (resized).jpeg

5F2CA118-A0A8-4314-B219-BF9E8599D56D (resized).jpeg

FDC9333F-649D-4DC3-80F1-87D8D82F4999 (resized).jpeg

New tubing on switches so they don’t look so trashy.

0B245F7C-5ECA-4296-A60C-AD6DCE29B661 (resized).jpeg

0BA25009-ECEE-4E23-9BD1-F1AEA9EB9ED6 (resized).jpeg

868F3BC1-EFA1-4A66-A09C-80C4BABB398D (resized).jpeg

811AC06D-4968-4278-A49B-469DEBB662A2 (resized).jpeg

It probably doesn’t look like it but there was 3 hours of soldering just the one side.

Saucer and single drop mechs installed.

1E551E14-FC81-4B7C-8513-EE610B8A6343 (resized).jpeg9A11FC82-876A-44DB-BC44-E7ED23EDFFB7 (resized).jpeg

They look 3D printed but nice resolution.

I’m finally back at it. Had a small window to get my Lightning wrapped up and ready for inspection and a test drive resulted in the rear calipers seized up after compressing for new pads/rotors. Anyway, new lines and calipers afforded my first real drive after nearly having it for two months.

56FE9D93-5DBA-48A3-817B-1EA91A7F04CE (resized).jpeg

6D6B4D9E-2CC8-4B6B-843A-A797B1A5B2F1 (resized).jpeg

Installed the four bank drop target. It’s switches received new clear tubing along with the right side switches.

Most of the right side is now soldered.

I still have the large target bank to rebuild, wait for a Nyloner I missed on one sling, install the left rear plastic, wrap up the flippers and adjust switches. I’m sure I’m missing a few things.

1586F4AF-6598-47C7-A6E6-64DA2F4A18D6 (resized).jpeg

3A96C8D3-CC52-4906-B02B-AA2F88800E30 (resized).jpeg

D877F51D-41C4-4DD3-A707-5FB0AB99E0FA (resized).jpeg

BCB49D95-D07F-401A-8766-A3FF43DBC826 (resized).jpeg

C444F1D5-61C0-4002-A3BB-0BC3D54AA53A (resized).jpeg

F1BEC0CF-CE44-4A54-967D-B625C1FF7551 (resized).jpeg

#ditchpinside

Agreed! This is one of the biggest PITA areas. When there were still relatively new and out making money, did Bally sell these plastics as complete with the new bells and all I wonder. I can see a tech saying screw this trying to do it lol.

Soldering is finally done. Flippers are all done and adjusted. Drop target assembly is torn down and being cleaned.

Top left plastic is installed with limited cursing.

65F3B9C6-8688-4867-B422-F18D022F6B37 (resized).jpeg

957C4DE0-6928-4057-AF98-EC4F6BB20270 (resized).jpeg

FF7F3933-7FC1-400F-ABAB-C37A69288086 (resized).jpeg

And thanks to phillyfan64 again as he confirmed two lamps wiring. Apparently there are some differences in the manual from the original to these later runs. Not surprisingly.