Hi,

When looking at the manual, I see that switches 57 and 58 correspond to left and right flippers.

In switch test mode, pressing either button shows the corresponding number, lets take left flipper, switch 58.

Switch 58 is row 2 column 8. White/red and green/grey.

But I find not trace of these wires on my flipper button blade switch. Were can I find under the PF a switch with White/red and green/grey wires and that correspond to the flipper ?

Thanks

Hi, there are, but they are linked to the coil, and there is no wire with such colours coming to the assembly

Thanks !! It was not obvious.