(Topic ID: 252525)

Early system 11 coil issue


By monkfe

3 months ago



Topic Stats

  • 2 posts
  • 1 Pinsider participating
  • Latest reply 3 months ago by monkfe
  • No one calls this topic a favorite

You

Linked Games

#1 3 months ago

so I recently got my high speed up after a full tear down. Despite my attention to watching the coil power/diode connection, I managed to still hook one up backward, and blowing a tip122(and f2). I replaced it and while doing so checked out all the drive transistors both pre drive and power for the solenoid drives. When i got to Q32 it seemed a bit off and I replaced it, while doing so I checked the predriver-Q28 which was giving me a DMM reading of ~232 both ways...figuring it was shot I removed it. When I bench tested it it seemed fine giving me a ~443 and blocking it in reverse? since I had not tested the coil yet (eject hole) I reinstalled everything and regained all but this coil (of course). So I removed the board and still have the same readings...so now I'm thinking I may have done some damage to the resistor networks, but before I start getting into that... I'd figure I pick some brains here as to what may be causing this anomaly. I wish I had just replaced the pre-drive as I had it out....but it seems fine? Thanks gents

1 week later
#2 3 months ago

...for those searching millennia from now...it was the nand gate keeping the pre drive high.

Promoted items from the Pinside Marketplace
From: $ 129.10
Cabinet - Sound/Speakers
PinWoofer
$ 164.99
Lighting - Led
PinballBulbs
$ 19.99
Eproms
Matt's Basement Arcade
$ 10.00
Cabinet - Sound/Speakers
Gweem's Mods
$ 14.50
Electronics
PinballElectronics.com
From: $ 18.00
Apparel - Men
Pinside Shop
$ 29.99
Eproms
Matt's Basement Arcade
$ 99.00
Gameroom - Decorations
Pinball Sales
1,200
Machine - For Sale
Sewickley, PA
$ 17.00
$ 9.00
Electronics
Yorktown Arcade Supply

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside