Playboy
Bally, 1978You're currently viewing posts by Pinsider tomdrum.
Click here to go back to viewing the entire thread.
That coin door trim screw will need cut back. If you have a set of wire cutters with threaded cutters it will need to be cut. 8-32 is the thread size. Cut the bolt off to the correct length using the old as a length guide. I use a Dremel to clean the hole so a 11/32" socket fits cleanly to tighten the nut. That one screw is the biggest PITA after the lower one that requires a 11/32" wrench.
You're currently viewing posts by Pinsider tomdrum.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/early-bally-ss-lockdown-receiver-q?tu=tomdrum and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Port Matilda, PA
Coffs Harbour, NS