(Topic ID: 157167)

Dungeons and dragons


By lma574

4 years ago



Topic Stats

  • 26 posts
  • 12 Pinsiders participating
  • Latest reply 2 years ago by rmmdam
  • Topic is favorited by 4 Pinsiders

You

Linked Games

Topic Gallery

There have been 10 images uploaded to this topic. (View topic image gallery).

20150622_184351_(resized).jpg
20160630_165629_(resized).jpg
20160630_165607_(resized).jpg
20160703_194952_(resized).jpg
IMG_20160427_202040185_(resized).jpg
IMG_20160427_214527147_(resized).jpg
IMG_20160427_214600111_(resized).jpg
IMG_20160405_184321397_(resized).jpg
IMG_20160405_184419447_(resized).jpg
678A07271_(resized).jpg

#1 4 years ago

Don't get on pinside much so I apologize if this is a duplicate.

I just picked up a a Bally Dungeons and Dragons machine. Would like to do a minor restore in it.

I looked at the parts manual on ipdb but could find any of the parts doing a Google search.... So here's what I'm after...

1) insert decals for the game. Can't find them anywhere.

2) games uses unique flippers. Only one is bad. Any out there?

3) topper and topper assembly... Mine just has big holes in the top.

4) translate trim pieces... Part numbers not found anywhere on Google... Any one today's standard trim pieces work?

Thanks in advance for any help.

LM

678A07271_(resized).jpg
IMG_20160405_184419447_(resized).jpg
IMG_20160405_184321397_(resized).jpg

#2 4 years ago

Interesting color side rails on lockdown bar... is that power coat?

#3 4 years ago

The previous owner did powder coat... Legs too...

#4 4 years ago

Were the ridged flipper bats originally used on this game, or just plain yellow flipper bats?

The original parts listing says 0365-00984-0300 - flipper w/shaft; molded (yellow) (3 req'd)

http://www.marcospecialties.com/pinball-parts/20-9592-6

[edit]: Hmm...I can't seem to find a yellow flipper bat without the "W" logo. Must be why the ridged flipper bat was used.

[edit2]: Ah, here we go: http://bayareaamusements.com/Merchant2/merchant.mvc?Store_Code=BAA&Screen=PROD&Product_Code=FB-A-3994-6
http://www.planetarypinball.com/mm5/merchant.mvc?Store_Code=PP&Screen=PROD&Category_Code=FB&Product_Code=PPS-A-3994-6

#5 4 years ago

Well that's them... the ridged ones... And I use Marco all the time so I can't figure out why I couldn't find those when I searched...bthanks tho!

#6 4 years ago

I've only ever seen the ridged bats on this game.

#7 4 years ago
Quoted from lma574:

1) insert decals for the game. Can't find them anywhere.

Check this thread out...maybe they can help

https://pinside.com/pinball/forum/topic/bally-dungeons-dragons-playfield-insert-decals

I also have an empty D&D PF in much better condition if you're interested.

#8 4 years ago

I am quite sure that standard translite trim pieces are the ones you need. I just checked my machine and they look the same as on my other machines. The ridged flippers are also on my machine although they might have been replaced at one time or another. However the purple kraken and green sea creature did not come on my machine.....

#9 4 years ago
Quoted from SixFootSnipe:

I am quite sure that standard translite trim pieces are the ones you need. I just checked my machine and they look the same as on my other machines. The ridged flippers are also on my machine although they might have been replaced at one time or another. However the purple kraken and green sea creature did not come on my machine.....

It's a beholder and a carrion. Sheesh, non D&D people

#10 4 years ago

See if this helps at all. I would recommend either just playing it and enjoying the game (you don't need the numbers on the flames) or restoring and clear coating the playfield. If your looking for help, try this: https://pinside.com/pinball/forum/topic/dungeons-and-dragons-rebuild

Just finished it up and had it down to MGC. With a cleared playfield, it plays super fast and it's ALOT more fun.

#11 4 years ago

The ridged bats are the correct ones for the game. http://www.marcospecialties.com/pinball-parts/20-9592-6

There is no cross reference for the old Bally numbers, your going to have to get creative or do a lot of digging. I was able to find everything I needed to get mine done, just have to match the parts up.

The trim is standard translite trim. http://www.marcospecialties.com/pinball-parts/03-822X-X

That should work fine

#12 4 years ago

You guys Rock... Thanks for all the help. I am seriously consider full restoration and clear coat... Maybe try for an award at TPF... Not sure yet... Buts it's being considered.

2 months later
#13 4 years ago

Ok so I bought some insert decals - haven't put them on yet, but it turns out that I don't need a new playfield or anything. this thing cleaned up much better than I thought. Id like a topper, but the one person on pinside that had one wanted about double what I am willing to pay so I will go without. Here's pics on the playfield and such...

LOUIS

IMG_20160427_214600111_(resized).jpg

IMG_20160427_214527147_(resized).jpg

IMG_20160427_202040185_(resized).jpg

#14 4 years ago

Looks really nice! I'm on the home stretch with mine and hope to post pics soon!

#15 4 years ago

Yeah I wish I had a topper but wife limited me to 200... cheapest one ive found, he persons asking 500.

1 week later
#16 4 years ago

did you limit budget of your wife?

#18 4 years ago

Love the wife. She has not killed you yet for all the pinball machines

2 weeks later
#19 4 years ago

yea, with 29 vids and pins currently in the house, I am not going to argue too hard over a topper. she is very good to me.

#20 4 years ago

I did a nice restore on mine. Love this pin. My favorite game.

20160703_194952_(resized).jpg

20160630_165607_(resized).jpg

20160630_165629_(resized).jpg

20150622_184351_(resized).jpg

2 weeks later
#21 4 years ago

love the topper

1 week later
#22 4 years ago

Very nice. Has that playfield been clear coated or just cleaned and waxed?

2 weeks later
#23 4 years ago

Just cleaned and waxed. Has mylar. Its bubbling in places but doesnt affect play and the pf still looks great

1 year later
#24 2 years ago
Quoted from DanTheGlassMan:

Just cleaned and waxed. Has mylar. Its bubbling in places but doesnt affect play and the pf still looks great

Yup, mine also has slight bubbling on the Mylar, but really doesn't seem to affect the game.

#25 2 years ago

Have any of you had an issue with getting a Check field fuse or FU1 fuse error when balls enter the teleport?The fuses all check out ok. I have replace the power board with a new board and replaced the ball trough option boards.

#26 2 years ago

I meant ball trough opto boards.

Promoted items from the Pinside Marketplace
$ 19.00
$ 12.50
Cabinet - Sound/Speakers
Gweem's Mods
$ 137.00
From: $ 18.00
Apparel - Men
Pinside Shop
$ 10.00
Electronics
Yorktown Arcade Supply
$ 3.00
Various Other Swag
Project Pinball Charity
$ 164.00
From: $ 220.00
Playfield - Toys/Add-ons
CzTV Mods
$ 45.00
Playfield - Toys/Add-ons
Docquest Pinball Mods
$ 29.95
Playfield - Toys/Add-ons
ULEKstore
From: $ 22.95
Apparel - Men
Great American Pinball
From: $ 20.00
Apparel - Women
Pinball Wheezer
From: $ 9.99
$ 20.00
Playfield - Toys/Add-ons
UpKick Pinball
$ 15.00
Playfield - Decals
Metal-Mods
$ 54.99
Cabinet - Shooter Rods
Lighted Pinball Mods
$ 899.00
From: $ 9.99
Eproms
Matt's Basement Arcade
$ 9.99
Eproms
Matt's Basement Arcade
$ 69.99
Playfield - Toys/Add-ons
Lighted Pinball Mods
$ 39.00
Gameroom - Decorations
Concealed Art
From: $ 33.00
Gameroom - Decorations
Rocket City Pinball
$ 5.00
Cabinet - Other
UpKick Pinball
From: $ 42.00
Cabinet - Shooter Rods
ModFather Pinball Mods
$ 360.00
Cabinet - Sound/Speakers
PinWoofer

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside