You're currently viewing posts by Pinsider wallybgood.
Click here to go back to viewing the entire thread.
Nice work. I would be interested in a WPC 89 Sound Board and BOM. Bare board for me. I will source parts and populate.
I really like the idea of the socket for the ADSP-2105 on the DCS Sound Board.
(I think that red looks cool, too)
Wally
Quoted from Crash:This wouldn't be possible without Dumbass!
https://pinside.com/pinball/forum/topic/there-s-one-more-addams-family
Yep, building Victor T's WPC Sound Board was nice winter project. I initially tested it in my WH2O then moved it over to TAF. Beautiful board! https://pinside.com/pinball/forum/topic/there-s-one-more-wpc-a-12738-sound-board
Wally
Quoted from ibis:Victor, Ill use fuse clips, just wasn't sure how the word was set up to accept the part.
If all I need is a 0 ohm resistor, and not the 470 ohm 1/4 watt resistor, if I use the fixed output regulator((LM2678T-5.0/NOPB), then Ill go that route! Thanks!!
Ill hunt for the inductor a little more. If I fail at landing one, Ill email you. Thanks Victor!
Hey Ibis
PSPA has the original inductor that Williams used. https://www.pinballspareparts.com.au/5551-09822-00.html
Wally
You're currently viewing posts by Pinsider wallybgood.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/dumbass-test-and-reproduction-pcbs?tu=wallybgood and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
