Hollywood Heat: Drop Targets not resetting

So the drop targets on my Hollywood Heat do not reset once all knocked down during game play. They do all reset during start up and at the beginning of each new ball.

In running a diagnostic they following switches come up as closed. 40,41,60, and 61

See attached pictures...
I noticed under the playfield that it appears a wire may have been clipped on the center drop target on each set of targets.
Was wondering if someone could send me a picture of the underside of their drop targets if there is a wire there and where it runs to.
20190723_161730 (resized).jpg20190723_165815 (resized).jpg20190723_162017 (resized).jpg20190723_165748 (resized).jpg20190723_162512 (resized).jpg

Success! Thanks for the pics BoscoKid!
Wire just like the ones in your pics I found wrapped back around a bundle... dont know why??? I figured there was a reason they were removed so instead of breaking out the soldering iron and reattach them I used clip leads so I could test it... well it worked! Game is now fully functional! Sweet
Game was so boring without them resetting.

Well I'll run ot like this for a while and if things continue running smoothly I'll solder her up!

Thank God for Pinside!