Radical!
Bally, 1990I’ve been working on my new Radical and the drop targets aren’t registering. Now I am getting 12 volts at the board, when I plug in one set of targets the voltage drops to 8.5. When I plug in both, drops to 6 volts. I’m assuming this is why they aren’t working? Too much voltage drop
Sounds like you have a cold solder joint. You're getting the +12v, but not enough amps to supply so the voltage drops as a result. Trace your +12v line backwards and retouch solder joints as needed.
Bill
Quoted from patrickvc:I’ve been working on my new Radical and the drop targets aren’t registering. Now I am getting 12 volts at the board, when I plug in one set of targets the voltage drops to 8.5. When I plug in both, drops to 6 volts. I’m assuming this is why they aren’t working? Too much voltage drop
yes but that would not have the game from registering..check those switches and see if they are properly adjusted
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/drop-targets-don%e2%80%99t-register-on-radical and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Phoenix, AZ