Having some odd issues with a rottendog driver board in my Lord of the Rings. During the game (about two thirds of the way through), flippers die, the ball will drain and the game continues. It will show the next ball and the display and sounds keep going, but no ball gets kicked out, flippers remain dead, and lights stay on. I just shut it down and restarted it. No issues, game starts having no issues. I went into the test menu, and checked tech alerts, it showed all ok.

Seen this exact same problem on a couple of other threads but no real solution other than getting another stern driver rather than a Rottendog.

I attached a picture of the led that goes out on the board.

Is there a fix? I don't simply want to toss out a rottendog board that I spent good money on. Are there components that can be upgraded or changed to fix this board?

Attached is a pic of the led that goes out when coils die.

Any help is much appreciated.

Thank you!

Rob,
I am not seeing u218. Just u18. The only 8 leg chip I see is U210, shown in my pic

Can't THANK you enough Rob!
Thanks to everyone that respoded

20170919_083446 (resized).jpg

20170919_083800 (resized).jpg

AWESOME!

Thank you

Thanks for all the help!
I ran a jumper and played 5 games Problem Free!!!

Big thanks guys!

20170919_214744 (resized).jpg

I am having this same issue on my Apollo 13. Is the fix the same?
Rottendog board. Exact same scenario as my first post 8 months ago.

Thank you

Yep,. It works now!
Thx