Addams Family, The
Bally, 1992You're currently viewing posts by Pinsider jrotten.
Click here to go back to viewing the entire thread.
You use the larger than the screw bit just to cut through the clearcoat. Then a smaller bit to open the dimple but not much. If you send screw in without cutting through the clear it will spider on you. I usually drill with a drill stop & dont go to far in. Hope this helps.
Quoted from Prouddadx3:Thanks that makes a lot more sense. How high up do you typically put the collar? Would you use the Brad bit first to cut through the clear coat or just a larger than screw regular bit?
Brad bit for clearcoat, a regular bit may walk on you. Let the bit do the work, I do this with a hand drill. Depth is very shallow. Ron Kruzmans kit is awesome.
You're currently viewing posts by Pinsider jrotten.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/drilling-into-addams-family-cpr-playfield?tu=jrotten and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Highland Lakes, NJ