Quoted from dasvis:Man, his Top card is NICE!
But the way he has it set up, it will kick you A$$ every time (at least for me). The one show I attended up there, I kept going back to Top Card all weekend. That, and someone's Big Shot!
To stay on topic. No dremel for me yet. No flex stones, no sand paper (400 grit seems awfully aggressive?)
Metal ignition file for all points. Dremel and flat grinding wheel discs to resurface tungsten points used on DC pop bumpers and flippers. Or disassembled and take to the bench grinder. Metal polishing pads (like 3M scotchbrite) for stepper boards and file again to resurface wiper blades (or replace if too far gone).
I already use Front line dry Teflon lube for other purposes and will start using it on stepers instead of the sticky super lube (finally running out of my MBI machine instrument lube). And will add Mothers to the arsenal too.
Oh, and I do pull out a piece of 1000 grit wet sand paper now and then (used dry).