(Topic ID: 40984)
Linked Games
Judge Dredd
Bally, 1993
Topic Gallery
You're currently viewing posts by Pinsider zene10.
Click here to go back to viewing the entire thread.
3 weeks later
Put in Davi 's crane. This one is available:
Tucson, AZ
1 month later
Quoted from Calfdemon:LED OCD and GI OCD work wonders on Dredd.
Just installed both on mine yesterday. I have the ocd boards on multiple games. Agreed it is a subtle but great addition and I love having the GI fade back.
4 weeks later
5 months later
Quoted from Jmckune:I’m also curious, what color is the planet originally and is there a place to get different colors of it? Mine is red but I’ve seen a few different colors and don’t see anywhere to get any.
https://pinside.com/pinball/market/shops/1167-gameroom-mods/04276-judge-dredd-deadworld
4 months later
Quoted from FieldDog1:Do haven’t tried that yet. I do already have a replacement coil so let me try that tonight and hope it works. Thank you!
You're troubleshooting so far is great. Two suggestions:
1. Try re-flowing the solder on the connections both at the controller board and at the coil lugs.
2. Here's a long-shot if the coil replacement and/or reflow doesn't work: I've seen weird things happen with flipper behaviour when the coil stop and/or the entire bracket get magnetized. I had this happen on my WH2O and a friend's Getaway. You can either use a de-gauss coil, an old magnetic tape/drive eraser to de-magnetize or physically strike the suspected magnetized metal part with a hammer. Remove the assembly from the playfield and remove the the coil and all hardware. Use the coil or eraser to demagnetize the bracket and stop. Alternatively, use a hammer to strike the bracket and separately the stop a few times. Don't pound the parts until they deform. Re-assemble and try. This worked for me for a while but the odd behavior returned after several weeks. I eventually replaced the bracket and haven't had a problem since.
3 months later
Quoted from StarWarsTurtles:Just finished 3 interactive Sniper Tower mods. These fit over the original Sniper tower plastic and connect to the GI socket underneath to light the main windows and connect to the 555 quick change bulb for the sniper window, with Sniper figure, to light when the sniper is shooting in Sniper mode and on the attract mode. Includes alligator clips or cut and solder wires. $89 plus shipping.
[quoted image][quoted image][quoted image]
[quoted image]
Nice, especially since the other sniper tower mod is no longer in production.
1 year later
Quoted from Freeplay40:Judge Dredd ramp update...
First I have a question for the JD owners. I purchased a very nice example of the game for the purpose of remaking the ramps. Ther are 4 ramps on the playfield, a subway that takes a ball from behind the J-U-D-G-E drop targets to the VUK that feeds the left flipper....then there is subway (2 piece) below the Dead World wheel that has an exit to the other subway. What I cannot figure out is how a ball can get into the 2 piece subway below the Dead World wheel. Am I missing something? It just looks non functional to me.
As far as the ramp reproduction is going, I have removed the four play field ramps and stripped them so I can get started on the molds for those. I will reproduce the subways if there is interest in those.
Subway does nothing. I’m speculating it was functional in the design stage but left out of the final. I always wondered if it was originally functional, where the entrance and exit would have been.
Promoted items from Pinside Marketplace and Pinside Shops!
You're currently viewing posts by Pinsider zene10.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
