Hi All,
Is anyone able and willing to use the lidar on their phone and an app to scan the topper for me.
Would love to attempt to 3D print one.
Cheers
You're currently viewing posts by Pinsider shmilder.
Click here to go back to viewing the entire thread.
Hi All,
Is anyone able and willing to use the lidar on their phone and an app to scan the topper for me.
Would love to attempt to 3D print one.
Cheers
Quoted from Mancave:Can buy them from pinball sites here at a reasonable price yup.
Far cheaper than getting one from the US at the moment with the shit dollar conversion + ridiculous postage costs!!
Sold out in Aus, once you add shipping, gst & conversion its far from reasonable anymore unfortunately.
Hi All, going through my recently acquired JD. My air raid ramp is damaged/warped but still functional. I'll keep my eyes open for a replacement (looks like its a hard fine) but for the moment its playable.
However when the ball exits the ramp (air raid) onto the wire form, probably 80% of the time the ball ejects from the wire ramp to either side. When the ball is travelling slow its not an issue, but as that shot is one of the harder ones and needs to be hit flush its normally travelling at speed. Which it then ejects.
Any help/advise to adjust?
Its particularly frustrating to finally hit the shot and not get the reward!
Cheers
How easy is it to replace the rubbers behind the drop targets? How much needs to be removed to get access? Thanks
Hi All, wheres the best place to tap in for 12v around the scoop. Have some starpost lights i need to connect. Cheers
Quoted from Mancave:Not near the scoop (so requires some longer wires) but just hook them all into one ground wire and one for 12V and tap into the coin door interface board @ connector J2. Pin 4 (grey/yellow) is 12V and Pin 5 (black) is GND. Should have an IDC style connector with the built in splicer and they will accommodate double wires. Heaps easier to do if you have an IDC insert tool (or even better, a Pancon) but can be done manually (and carefully) with a flat blade screwdriver. Doing it this way means you aren't soldering to any place nor using alligator clips.
Cheers. I'll have a look.
Another quick question. When my machine does a ball search or loses track of ball numbers, the plunger fires multiple times and continuesly until it finds a ball. Is this a code glitch or my machine.
Evening all,
i'm getting a check switch 61 globe position 1 error, am i right this is one of the opto switches within the globe mechanism? what exactly does this control? the error has come out of the blue.
Can anyone also tell me which switch is for the scoop? I don't think mines registering (can't claim jackpot)
Thanks
IMG_3287 (resized).JPGQuoted from metalkatt:[quoted image]
Cheers, but was more trying to figure out what that switch does? why does the world have 2 switches? does it relate to the globes position? ect
You're currently viewing posts by Pinsider shmilder.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/dredd-owners-thread-members-only?tu=shmilder and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.