Hey Guys not sure if anyone else has tried this I did see one of the toys posted for sale but that it was used as a topper a hand full of pages back.
I just got the Mezco 1/12 size Judge Dredd figure and shoved the whole thing behind the Dead World with his base that he comes with. I took the 2 rings off and just placed the whole thing toy and base stand in, half is on top of the rear orbit lane so doesn't affect ball travel.
I just put him in still working on the final pose, I will probably add a little glue to the gun and to his foot that is attached to the base Shield he comes with to pose him.
The toy himself is excellent! Great quality and his uniform matches the ones used on the playfield exactly. I'll probably add some extra lighting to accent him, a spot light at least.

IMAG0151 (resized).jpg

IMAG0150 (resized).jpg

One more pic

IMAG0152.jpg

Hey guys I am looking for a left out lane guide the tab on my by the flippers is missing if anyone has one and willing to let it go please let me know thanks.

20180309_105131 (resized).jpg

20180309_105124 (resized).jpg

Hey guys quick question, does Dredd have a knocker in the head? I always thought mine was just missing and today I pulled one from a different parts cab and put it into the Dredd head but there is no where to plug it into.

Thanks guys figured it out, someone at some point tried to connect the knocker wire to a counter by the coin box but it only had one wire left connected so that didn't work either. Disconnected that plug and plugged in the knocker and it works fine. Thanx again

I did mine with the red drops on the outside and the yellow in the middle, I think it makes it pop better and easier to see what you are trying to hit.

20190202_221111 (resized).jpg

I really like this stuff whenever I have to lube something up that typically doesn't need it. Great for Spinners also.

20190202_221135 (resized).jpg

Anyone install a set of Decals from Retro Refurbs? I am digging this alternate Blue version.

judge-dredd-blue-two-alternate-pinball-cabinet-decals-artwork-alternative-comic-flipper-side-art (resized).jpg

Do you have a left inlane guide? The tall one by the flipper? Mine has a busted tab on it.

Got a bunch of Judge Dredd parts and ramps if anyone needs something let me know.
Black Out and Stake Out ramp look good besides the entrance flaps.
Air Raid has a crack but can be repaired with Scigrip and should hold up fine.
Main Ramp is missing a chunk at the entrance but the rest looks fine.
Subway is just dirty pretty sure that is a JD part, stuff is getting all mixed up
Under playfield light thing has a crack also could be repaired and hold up fine.

20220330_093539 (resized).jpg