Winchester, VA
I'm working on a Dragon and I keep getting odd measures in/out of the PS board. I am running a Rottendog board in it.
Here's what I'm getting on A2-J1:
10.8 in where it should be 11.5
13.0 where it should be 14
And no reading at all at 69v (am I doing something wrong here??)
Leaving the board at A2-J2 I'm getting
10.3 where it should be 5v
And -25.5 where it should be -12.
I'm stuck. I don't know where to go from here.
