Dr. Who pinball mods (Super Dalek)

(Topic ID: 23202)

Dr. Who pinball mods (Super Dalek)


By rgb635

6 years ago



Topic Stats

  • 44 posts
  • 29 Pinsiders participating
  • Latest reply 3 years ago by rgb635
  • Topic is favorited by 20 Pinsiders

You

Linked Games

Topic Gallery

One image has been uploaded to this topic. (View topic image gallery).

060912192842.jpg

You're currently viewing posts by Pinsider rgb635.
Click here to go back to viewing the entire thread.

#1 6 years ago

Video is a little shaky (sorry).

#5 6 years ago
Quoted from rcarlson:

Nice...

What did you use to get the red leds on the Dalek body to strobe?

The chase LED's are a universal kit (see link below). I added an adjustable time delay relay to keep them actively lit during the Dalek modes. I tapped into the original Dalek blinking light circuit to activated it and although I didnt try it without the relay... I felt it would flicker too much due to only activating with the actual original light pulses when the Dalek speaks.

http://www.bakatronics.com/shop/item.aspx?itemid=768

Be forewarned....installing and wiring the LEDs was super tedious work!!!

060912192842.jpg

#7 6 years ago
Quoted from Cliffy:

Nice mods and SUPER nice Dalek (which is pronounced "doll-ek" by the way []
I still want to get your template for that aluminum plate behind the targets, although I'll probably make it in stainless coz that's what I do [] Thanks for the show!

Dang Cliffy.... I wish I would have know you wanted the templet. I just had that thing apart tracking down an opto problem!! As you know, no Dr. Who owners want to take that damn time expander apart if they dont have too (lol). Marco has the base plastic and this was what I used exclusively!! took me a while too but I know you can hook it right up!! As far as "doll-ek" ill try but I'm a good ole' Georgia native and sometimes that drawlllll just takes over!! lmao

Heres the marco link: http://www.marcospecialties.com/pinball-parts/03-8655

#8 6 years ago
Quoted from Scuba_Steve:

I agree completely. Any more details on it?

You will have to gut it, discard the base, & replace the led with a 12 volt 3mm led. You may have to get a little creative with the mounting but its not that difficult. Looks a ton better in person!!

amazon.com link »

http://www.led-switch.com/12%20volt%20LED.htm

#13 6 years ago
Quoted from Atomicboy:

Wow man, I don't think I'll ever have enough time to do that, but man, yu did a wicked job! I wasn't expecting much when I opened this thread, but that is awesome.

What would you charge to make one? []

Thanks everyone!!! ...Ill PM you Atomicboy.

#15 6 years ago
Quoted from fattrain:

The gloss and lighting on that playfield looks amazing!

I had to sand a re-shoot it like 4 times but I finally got it right!! Thanks Fattrain

#17 6 years ago
Quoted from gweempose:

Fantastic job, rgb! That's without a doubt the nicest DW I have ever seen. The only problem I have with your mods is that the Slitheen ships are from the wrong era. Those are from the new 2005 relaunch, whereas the game is based on the original series which ran from 1963-1989. Nevertheless, they still look cool, and only a sci-fi geek like me would even notice that they are out of place.

Gweempose you wont believe how hard I had to search for some replacements for those little black ships. After a few weeks I was about to give up and then I stumbled on this little web site for a store in the UK. Those were the only ones from the Dr. Who series I could find that would fit without looking crazy. I didn't want to go away from the theme with some Star wars ships or something (lol). I haven't even seen the episodes that have these ships but now I can track it down now that I know which series they are from. Thanks for the compliments and the info. I am trying to learn more about the Dr. Who series now that I have the game.

#26 6 years ago

Thanks everyone I really appreciate the positive responses

Quoted from markmon:

Really cool. Can you detail how you integrated the shaker? Similar steps could be used in other games. Like what you wired specifically ?

Let me take some pics..Ill post a little later

4 months later
#34 5 years ago
Quoted from daley:

Did you have to add any extra screws to make the kickout protectors from High Speed work? Or did it work with the existing hardware?

No extra screws...the mounting holes on the protectors are off just a bit on one side or the other. I just power drilled through it when reattaching the hole deflectors and it was snug as a bug!!

#37 5 years ago
Quoted from RipleYYY:

the video is crappy

but even that, we can see you have a very nice pin, with cool mods !

Yea the video actually looks better when NOT in full screen. I didnt have the HD setting correct in my smart phone.

2 years later
#44 3 years ago
Quoted from dendoc:

Bump again just for the passion of a great Doctor Who lover.

Quoted from Nepi23:

Really nice DW, congrats!

Quoted from Getssum:

Stumbled upon your video on youtube and found the link here. Love your mods!

Thanks Guys!

Promoted items from the Pinside Marketplace
$ 239.99
$ 29.99
Cabinet - Sound/Speakers
Lighted Pinball Mods
$ 159.99
Lighting - Other
Lighted Pinball Mods
4,500 (OBO)
Machine - For Sale
Fairfax, VA
From: $ 99.99
Cabinet - Other
Lighted Pinball Mods
From: $ 9.99
Eproms
Matt's Basement Arcade

You're currently viewing posts by Pinsider rgb635.
Click here to go back to viewing the entire thread.

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside