OP

Quoted from Nfmsuprar1:

I just purchased a Doctor Who and it was working great at the sellers house. I transported it home and got it set back up . Now having mini playfield issues, It stays up about a quarter inch and wont go up. In the test menu it shows 2 CW and CCW errors.
Looking at the owners manual it states if it has both of them errors then the motor wires are on one wrong. Can't be the case as nothing was changed from when I played it at the sellers home. It dont look like any thing came loose or damaged from moving it. What should i look for?
Thanks in advance!

OP

Quoted from Nfmsuprar1:

Appreciate the info guys. I don't have much experience and if I can't get it figured out I have a guy that will help with much more experience.
I do notice that I have a 3rd error also that I missed before. Check switch #71 miniopto5 bank r1.
Will mess around with it today.

OP

Quoted from Nfmsuprar1:

I checked the j206 connecter and its connected well on both ends as far as i can tell. No loose wires,Knicks,etc.
I havent taken the mini playfield out and maybe thats the next step. Cant see the botton too well with it installed.
The motor turns up and down but almost acts like a stripped gear or something is jammed not allowing it to move freely.