To clarify why you must wire it this way, you want the hot side flowing only up to the power toggle switch and no where else when the machine is switched off.
You're currently viewing posts by Pinsider dr_nybble.
Click here to go back to viewing the entire thread.
To clarify why you must wire it this way, you want the hot side flowing only up to the power toggle switch and no where else when the machine is switched off.
Here's my tip, you can get a nice pre-stripped power cord from Home Depot: http://www.homedepot.com/p/Husky-8-ft-16-3-Power-Tool-Cord-AW62631/100661442
And yes, use your meter to check which wire goes where.
You're currently viewing posts by Pinsider dr_nybble.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/doodle-bug-power-card-wiring-help-needed?tu=dr_nybble and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.