Monster Bash
Williams, 1998You're currently viewing posts by Pinsider Coyote.
Click here to go back to viewing the entire thread.
AE2411 will work. Any AE2[4-8]11 will work, actually.. You know, if you wanted someone to insert a $100 bill.
Needs to have a 'Compact' bezel (5th digit needs to be a 1 or 4 or D. i.e. An AE2541 will work.)
If you no longer have the power cable in the game for the upstacker, you'll need to either make your own (not difficult) or find on. If the DBV does not come with a 9-pin harness, you will need a Mars p/n 05AA0003 harness.
Coin meter units, leave off.
In switch test, see which coin switch is bring activated for a bill inserted. (Should be Coin 4)
There is a setting (on phone, can't verify exact wording or setting) that sets which coin slot the DBV is on. Make sure this matches what switch was activated in switch test.
You're currently viewing posts by Pinsider Coyote.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/dollar-bill-acceptor-for-monster-bash-or-similar?tu=Coyote and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Livermore, CA