Does anybody have a scan of the Dr. Who playfield?
You're currently viewing posts by Pinsider ClarkKent.
Click here to go back to viewing the entire thread.
Can somebody make photos of the blue ramp decals on the upper left side? Do they have any color gradient or is it solid blue with red borders?
The color gradient goes in which direction?
And the one on the side of the plastic ramp (sticks vertically on the border)?
Some more detailed photos would be really nice to reproduce them as good as possible...
Many thanx! As far as I can see it the color gradient is simply from light blue to dark. Correct? Is the darker blue facing the backboard?
Can you give me measurements?
Would be the best of you could clean it and scan it.
Quoted from bpull:17 inces long, 1.125 inches wide. Yes light to dark. I can try cleaning it a bit, but I don't have a good enough scanner. I've tried emailing the company who sells the ramps several times to see if they would sell me the stickers, no one has ever answered them.
Thank you!
What do you mean by not good enough scanner? Do you have any? If yes, just try to scan it and let me see the result...
Otherwise please make good photos from straight above without flash light at daylight so that I can see that better.
Does anybody have 3d objects files (for Blender, Cinema4D, etc.) for Doctor Who? A dalek, cyberman, davros, tardis console, weeping angle, who car, etc. would be really nice. Doesn't need to be very highres, I do not 3d print that.
Quoted from pinball_faz:Check out Swinks creations:
https://www.shapeways.com/product/4RMBTZ62X/whomobile-pinball-mod-1-40-enclosed?optionId=57879806&li=marketplace
Lots of options of the whomobile and he's always creating.
faz
Thanx for the info - but I'm only looking for the meshes and not the finished product...
Is there a source for the ramp decals? Maybe somebody has restored the ramps and scanned the decals in the process?
Quoted from Rdoyle1978:I have only seen them for sale along with the ramps themselves. They are in stock at little shop of
Games for example.
I only need the decals, scanned if possible. So if somebody bought the ramps, please scan the decals before applying them...
Still searching for the printed ramp and playfield decals. At least the Time Expander decal (31-1688-1) would be nice. Scan only.
Quoted from Robotworkshop:Spotted a Time Expander decal on ebay if you still need one. Item # is 273248077990
Quoted from Freeplay40:Appears in stock at Planetary Pinball.
Thanx for the info. Shipping is way too expensive for this small piece of paper. A scan would be very much appreciated!
They were using some kind of vinyl with applying glue on the printed side. I have several decal scan but missing some, especially the ones on the ramps - would it be possible to get the scans from your guy?
Can somebody tell me the closest Pantone colors for the plastics? Especially the yellow, red and light blue.
Darn gender politics, it's extreme in GB. If they replaced the Doctor because it's good for the story but they only replaced it because of the gender politics. Happens to other TV productions, too...
Quoted from eyeamred2u:Which one? The top side or the whomobile underneath?[quoted image]
The one with the Whomobile on it. Sure it can be scanned - just stick it on trasparent film, scan it and put it back. I‘ve done this with other decals, too...
Quoted from pinballinreno:The problem with decals/stickers, is that when they get removed they curl up horribly.
Hard to get them flat again.
I peeled off a couple and scanned them.
I also photographed a couple.
After editing and printing they look very similar.
Face it, a scan is also just a hi-rez photo.
So for now, I think that a good hi-rez photo is as good as a scan.
Cell phone cameras are amazing.
Just shine a flashlight on the decal when you take the picture.
I think the key is getting good hi-rez pictures with good lighting.
Then please at least a high res photo.
Quoted from eyeamred2u:I remade the whomobile decal. Here is my work installed on my game.[quoted image][quoted image][quoted image]
I need the rampdecal with the whomobile, the one under the ramp
Quoted from pinballinreno:Let me see if I can get if off the old ramp.
I'll scan it and email it to you if I can get it in 1 piece.
That would be great! The dark blue decal with the whomobile. Thank you!
And if you could also scan the one on the right side (the thin long one on the ramp border) this would be even greater!
Quoted from Zigzagzag:Hi,
I'm missing two of the decals on the left ramp - the "complete repair each target 1 million" one and the "force field" one beneath it, on the side of the ramp.
I can't seem to find it for sale online - only a complete ramp set with decals.
Does anyone know if these are available or could share a scanned file ?
If you need anything, I have all decals scanned and restored.
You're currently viewing posts by Pinsider ClarkKent.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/doctor-who-owners-clubtime-lords-welcome?tu=ClarkKent and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.