I recreated the decals for the Doctor Who Time expander shield. The metal thingy that goes around it, not the clear one that goes on top of it! They aren't perfect, but if you're wanting something prettier than scuffed images with metal showing through, this should work. It's in two pdfs, the first is the insides and the top back, the second is the outsides. They're bitly links, so they look funny.

Sharon

http://bit.ly/XKjxkj

http://bit.ly/YFonRm

Thanks, I'm glad I could get them looking okay. They *should* be a little big, enough that you can get it centered pretty well and then trim off a little bit of the red borders. I am not convinced that all of the shields are the same size, the red border was a close fit on mine.

To (hopefully) stop more gouging of the decals, I think you can pull the sides apart a little (thanks RawleyD for the idea) so that the screws holding the ball kicker optos on don't rub. And then when you fasten down the shield, it will pull the front corners back into place, so it's bowed out from the kicker optos a bit.

It occured to me that it wouldn't be that hard to replace the master's face with pretty much anyone I wanted lol.