Mousin' Around!
Bally, 1989
Whirlwind
Williams, 1990You're currently viewing posts by Pinsider waymon.
Click here to go back to viewing the entire thread.
Sign me up! Picked this up last night. Waiting on sheet for back glass to come in. Fits nicely in the lineup though.
I will second the slingshot plastic. I could use a pair myself.
109460E2-2B35-4834-9979-8A6C7A3FEA84 (resized).jpeg1EF69E3E-4F8D-47A4-B8A8-4251A9B16D3F (resized).jpeg7934B0E0-BB8E-4B1B-93A6-410A5C885C27 (resized).jpegQuoted from Pinash:Thanks! I’ll roughly match the overhang of my other pins (less than 1/8”). Does the inside bottom of the back box have these brackets, or was this a “repair”?[quoted image]
Mine has these brackets. Only reason I know is because I need to do the same repair you are working on. My backbox bottom sags a bit. Please take pics of what you had to do.
Quoted from Pinash:I’m trying to take pics as I go. Fixing the bottom of the back box doesn’t seem as challenging as the lower cab. Right now I am gluing/clamping some questionable/delaminating plys at the bottom corner. Once that’s dry and clamps are off, I will confirm the measurements of the bottom panel. Looks to be 27-3/16 x 6-1/2.
I’m not trusting the layout of the bottom panel I ripped off, so I’ll template the holes from the brackets and hinges themselves. Once all that’s done, I’ll glue/nail in place. There as some hideous screw holes on the outside of the cab from the previous repair, so I plan to drill those larger and glue some dowels in. That not only fills the holes but strengthens the joint.
how did this end up turning out? Pics?
Well, my Mousin went down today. Had some folks over and a breaker tripped (Completly different issue to fix) and it no longer had 5V. Powere supply board is a Rottendog so once schematics were found I was able to determine that the switching regulator is bad. Little board does a lot it seems. Now to find somewhere its in stock or buy another power supply board. 
Hopefully it will be back up soon.
This is the part on the board. I have ordered one from Ebay. The board you link would work though. I have desoldered the part that fried. Going to replace it before moving to a new board.
Quoted from snyper2099:I have a working used one for $80 shipped, if you want an original board.
If this part doesn't work, I will reach out to you. Worth a try for $15 as everything else tests good and this component gave a smoke show.
Quoted from snyper2099:Using this picture can you describe where and how you are installing this part..?
You bought that part to replace the voltage regulator? How do you plan on mounting that to the heatsink?
[quoted image]
Power supply is Rottendog WDP011C revision 3. This part is not on revisions 1 and 2. This is part for U191.
pasted_image (resized).pngQuoted from snyper2099:Oh, I forgot you had a Rottendog PS... I really only use replacement boards as a last resort. Bulletproofed originals last a LOT longer.
Came with this board and an Xpin aux power board. Has worked with no issues until my breaker tripped. Finished basement apparently has way too many plugs on the same breaker so now the fun begins to try and change that without a "remodel" HA.
Quoted from dj10bear:Hello, I just purchased a Mousin' around and I am missing the entire "3 switch PCB" located in the back "Mouse Hole" trough. Part # C-13061 (seen in the attached images). I am looking for images of this board in order to re-create it from scratch as it seems this part is not available anywhere. unless you have one to sell?
Also - what do these switches exactly do? I know they were put there for a lock system that was scrapped before the game was released... but not sure what of the 3 switches do now - if anything? would 1 switch suffice?
I would appreciate any sort of help, thanks
Paul
[quoted image][quoted image][quoted image]
I dropped off my board to post office this morning. Hopefully you won’t have to wait too entirely long for something that will work.
Very simple board but not obtainable. Interested to see what comes out of the oven and look forward to contributing to keeping these things alive and kicking.
CB436ACF-5E0B-4841-870A-C8C59D4EEE9A (resized).jpegQuoted from dj10bear:waymon Hello, are you sending your board to Kurt? I hope so!!
Hello, thanks for the info. To answer your question... the coil works/fires without this board present. Although the jackpot does not register...
I did send it to Kurt. I have one of the boards and it works great. I now have a used board for my stock.
You're currently viewing posts by Pinsider waymon.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/do-you-want-to-mouse-around-mousin-around-owners-club-all-welcome?tu=waymon and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Memphis, TN