I'm having an issue with the DMD on Bram Stokers Dracula. It has been slow to start at startup for about a year, it would take a min. or 2 to start and now it has stopped. I checked the DMD in another game and it worked fine.
Thinking it was a power issue I replaced the DMD controller board with a new one. No help, still no power.
I'm getting a reading of -144v at the test point on the DMD Controller board where it should be -125v. That's too high.
Why is that? I'm assuming that has something to do with my problem.
Any help would be much appreciated.