Hi everyone,
I thought I'd post my question to this thread. I have a DMD extender that was working fine for my Batman Forever but then about 3 days ago the display said no signal and my whole pin would not boot up. Power would be on but that's it. I then did some more digging and noticed that there was no power going into the raspberry pi as the LEDs that show it is on was in fact not on. I've checked fuses and all seem to be working. Do any of you have ideas as to why the pi is not booting up or getting power?
I also tested the DR on a brand new pi on a computer and it worked so nothing is wrong with the pi or the memory stick.
Thanks in advance!