I can't seem to find any thru-cabinet coin entry chute/slides at a reasonable price so I thought I'd try to fabricate it. I used an old coin door that was bent and rusted. Using the inside of the coin door where the mechs attach to, I cut out some material and started creating... the coin (penny, dime, nickel and quarter) rolls down the slide and into the mech with no problems. Just need to add the mounting brackets for this one (.25 cent) and then I'll do the other one (.05 cent)...

thanks

Steve

Coin_entry_chute2 (resized).jpg

Coin_entry_chute1 (resized).jpg