I'm using a buck converter on my Hollywood Heat to replace the 5v board, since it has fried two Pi zeroes with voltage spikes.
You're currently viewing posts by Pinsider thatonedude.
Click here to go back to viewing the entire thread.
I'm using a buck converter on my Hollywood Heat to replace the 5v board, since it has fried two Pi zeroes with voltage spikes.
I used a Pi4 to boot mine up for a test. Took some extended headers to work.
I had a bad power supply fry 2 Zeros. What can be done to clamp down on the 5v source?
Quoted from northvibe:what power source, or psu do you have in your game?
It's the 5v source. I forget the board name(A2?) off the top of my head. It spiked twice(>6v and >9v) and cooked the voltage chip on the zeros both times. I sold the game after that. :/
I am going to order some LISY80 boards. Grabbed the gerber, CPL and BOM from here: https://lisy.dev/swrep/LISY80/smd/
The process went fine, no errors. However, I did note that there are no sockets being populated, and I don't see them in the BOM. Is that correct?
Screen Shot 2022-10-10 at 11.21.33 AM (resized).jpgScreen Shot 2022-10-10 at 11.21.41 AM (resized).jpgScreen Shot 2022-10-10 at 11.21.47 AM (resized).jpgQuoted from Zigzagzag:It's for Hollywood heat and Gold wings, I'll send you a PM.
Dang, @cheddar, sounds like he's got our projects
309600188_2201051340102229_1994479198721584417_n (resized).jpgI'm thinking of doing a LISY80 order in the US. I think I'll have 1 or 2 left over. Anyone interested?
Quoted from Nds777:I have an extra if you just need 1.
I would normally, but I'm also ordering for a friend who wants a couple.
You're currently viewing posts by Pinsider thatonedude.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/diy-lisy-a-replacement-mpu-for-gottlieb-bally-amp-stern?tu=thatonedude and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.