So, I'm thinking this is a board issue... But here goes. On start up, I get 1 error - Right Ramp Entry (#51)... I go to test menu, and when I depress the switch, it lights up switch #41 and #31.... The pin has not been hacked or anything... I should mention prior to all this, I replaced the switch to clear the error and it did nothing different. Thoughts?
Did you wire the switch correctly? Diode installed? Diode installed in the proper direction? Compare your work to what the other switches look like.
Times I had a switch issue caused by something on the board, 1%. Times I had a switch issue caused by something on the switch, 99%.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/dirty-harry-switch-matrix-issue and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Newberg, OR
