Run the gun test and make sure the switches are reporting during that test. The cam under the gun pushes on the switches and it might not be pushing far enough to activate the switches. The actuator arm on the switches may need to be adjusted.
You're currently viewing posts by Pinsider schudel5.
Click here to go back to viewing the entire thread.
Run the gun test and make sure the switches are reporting during that test. The cam under the gun pushes on the switches and it might not be pushing far enough to activate the switches. The actuator arm on the switches may need to be adjusted.
It might not be the motor board but Q36 on the power driver board that's locked on. Test that transistor first. But yep that's the motor EMI board.
That's weird. In switch edge test does the switch under the playfield register as switch 76 'gun position'? Just seeing if that is in fact what it's registering as so as to eliminate a diode or switch matrix issue. If you press it 20 times does it always register as switch 76? Does a game start? Any credit dots?
Quoted from acpinlover12:Also, you let the gun initialize for 3 or 4 minutes, right? It's not that quick a process....
That's a good point. I don't think it's that long. But after I run the test it does a fast sweep, followed a slightly slower sweep and keeps doing this 7 or 8 times (maybe a minute tops) until it's a slow sweep.
You're currently viewing posts by Pinsider schudel5.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/dirty-harry-gun-issuesgun-wont-calibrate?tu=schudel5 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.