Hi guys, wondering if any one can provide me with pictures of the wiring for the 2 relay boards on diner. One in the back box and one underneath the playfield. Is there a way to test these also once I pull them off and rebuild the connections. Also a picture of the interconnect board wiring for the yellow and yellow and white GI wiring. Bought a new interconnect board , previous one was a mess. From my pictures you can see what was done at some point when it was on route. All the green wires you seeing were soldered directly to the interconnect board. When I got the machine , like an idiot turned it on and things went bad from there. Had some GI working, andsome flash lamps start smoking and the coil for the ramp lower start smoking. (The coil issue is a separate issue I'm sure.) Now no GI at all. I have been looking at scemactics but at this point the wires that were used are even the same. Please help!EB8FE8FD-0F5B-4996-86CC-58E75C4725B1 (resized).JPGEB8FE8FD-0F5B-4996-86CC-58E75C4725B1 (resized).JPG
41004514-2FDB-47FA-B685-5B83A284BB56 (resized).JPG6637EB24-4349-4E0B-9B41-D1A191C3318D (resized).JPGA1609221-A653-466D-B53B-82C725A017B8 (resized).JPG