Who knows parts number for diner flaps?
You're currently viewing posts by Pinsider vbobrusev.
Click here to go back to viewing the entire thread.
Quoted from Tomass:Can you be specific? I assume this one but where are the other 2? Or do you mean the ramp flaps. Sorry, been a while since I had it opened up.[quoted image]
i am talking about shooter flap and ramps flaps.
Quoted from pinballinreno:I ordered a new clock wheel from marco:
https://www.marcospecialties.com/pinball-parts/03-8161
Part number looks correct.
Mine is very loose and crooked fitting. Plus a big chunk is missing from the arbor.
I drilled an tapped higher up as a fix but its awfully crispy plastic now.
It works good for now, but will probably crack off again.
Does anyone have a NOS or repro clock hand decal?
I can scan and make one but maybe one from vinyl would be more durable.
if you make scan i can do repro. i dont have this decal on my diner, and i still need it also.
i will make decals for clock in backbox. Because its out of stock everywhere. If somebody need it. Let me know.
Quoted from pinballinreno:You need a spring for the chef! I could also use a few.
What springs do the characters use?
i use this one for characters. https://www.marcospecialties.com/pinball-parts/10-363
also i will reproduce all metal flaps from stainless steel, who interested in flaps, let me know i can do extra sets for you.
Quoted from shiffdog:Both are in the upper left corner.[quoted image][quoted image]
Thanks, i found clear plastic but didnt found with print in my machine. Able somebody to to few plastic scans?
Looking for CPR Silkscreened playfield silver or gold. Let me know if somebody have something for sale.
Hi! I am fully restored my diner pinball and make from piece of shit a candy
43D3DD0E-2E2B-4325-A1DB-6D2A16D8F30E (resized).jpeg
064C6972-D2B1-4255-9C5B-BC46EB2B7A15 (resized).jpeg
7169687A-9648-4094-8846-EE493B1739D9 (resized).jpeg
8767A2EA-C9E9-4E11-B57D-E6906F386A32 (resized).jpeg
CA32A5DE-C882-43F7-A308-499962824623 (resized).jpeg
A421D1B0-5878-42D8-98BD-4F680FEC5B6B (resized).jpeg
A32FBCF7-EA27-4705-AD33-7D7EBF1D940B (resized).jpeg
93368127-D05C-4E02-B886-4F05135C727F (resized).jpeg
592FC8D8-A1B2-4CA3-A1D0-F2FAF0ADF60C (resized).jpeg
52AD4528-DBBD-414D-B3B4-E0C15ECDC041 (resized).jpeg
039EAF08-8E6A-4CCD-91A6-7573003AF369 (resized).jpeg
5EEC7FDE-0B4B-43BA-985D-ECD274FF8DA9 (resized).jpeg
Quoted from BJM-Maxx:Looks very nice. Where did you get the nice polished lock down bar?
It’s standard bar, I am sand it via 250, 500, 1000, 1500 and 2000 after that I polished it with paste
Quoted from pinballinreno:Beautiful game Vitaly !
The hard work shows.
Now, make me some Stargate plastics.....
Thanks! But i dont have time to do some plastics, sorry.
Anybody fix special solenoids in Diner? Today i made mistake, i didnt checked fuses from previous owner, and some fuses has more amps than should be, and my Q73 burns and also burn, pre transistor. i changed q73 via tip122 but it's short after first fire of coil between legs 2 and 3. I think something wrong with 7402, i will try to change it tomorrow. Any ideas where i can find answer?
Quoted from pinballinreno:Is the right pop bumper shorted to ground? Or wired wrong?
Always closed and hot coil
Quoted from DumbAss:[quoted image][quoted image]
Already fixed, you was right, changed few diodes on AUX board and also changed 7402 with few transistors after, everything works fine.
Thanks!
Hi! I have issue with diner and ww, maybe somebody know what can be helpfull. So if machine is turned off and ball located on outhole but not kicked to through with other balls, if i will turn on game it can blow cabinet fuse 4A slo blo for 250v. Any ideas why it happens and what can be help? Maybe somebody has same issue?
Thanks
Quoted from dozer1:Have you tried replacing the C-30 capacitor on the MPU? Weird startup issues can be caused by that. I have had quite a few that a new C-30 has fixed.
Thanks for advice i will try to replace it. you talking about 22uF?
You're currently viewing posts by Pinsider vbobrusev.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/diner-clubowners-and-previous-owners-welcome?tu=vbobrusev and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.