Glad to join the club finally! Picked up mine locally which never seems to happen with games i'm hunting down lol. Actually hadn't played one before but i have (what i believe to be) a goofy sound issue. When i hit the left loop under cash register, or if i lose a ball (happens...) i hear Haji start to speak. He says "can you please..." then cuts out for a normal sound. Right when the tip is adding up he says it again. I don't think this is normal especially when he's not even one of the customers ordering food at the time.

Any thoughts? bum sound ROM?

Reimport originally wired for 220? European games would use a 4amp fuse. North American use 8amp.

B334FB31-3A11-46CA-A664-367F6948B6D5 (resized).jpeg

I read back a ways but maybe didnt see all the posts related to your issue. So if this was done or mentioned already then just ignore...

I would have a closer look at your bridge rectifier on the PS. See if that has failed on ya.

Was the preorder list still open then? Or was it the standby list you joined. Thats all i could sign up for when i did it. Standbys only get pf’s if they have any left after the preorders of have gotten theres (or backed out).

Basically what you want to do is create a “Y” out of each wire. I take a piece of wire say 4” long and bend it in half. At the halfway point strip away some insulation. Slide on some heat shrink tube over the original wire, solder it to the new wire (in the middle where you stripped it), then slide heat shrink over joint and heat it up.

Now you have one wire split two wires (the Y), slap on some Trifurcons and insert into now molex housing in the same positions that formed the former loop. Repeat for each wire loop.

I think the GI wiring is 18ga. But ya use the same gauge as the original.