http://www.electro-tech-online.com/threads/1n4148-replaceable-with-1n4004.32693/
A 1N4004 has a 400V rating and a 1A continuous current rating. It is pretty slow.
A 1N4148 has a 75V rating and a 300mA continuous current rating. It is pretty fast.
You're currently viewing posts by Pinsider acebathound.
Click here to go back to viewing the entire thread.
http://www.electro-tech-online.com/threads/1n4148-replaceable-with-1n4004.32693/
A 1N4004 has a 400V rating and a 1A continuous current rating. It is pretty slow.
A 1N4148 has a 75V rating and a 300mA continuous current rating. It is pretty fast.
Quoted from Lovef2k:I was also wondering why Bally used different ones on certain switches. I guess use the 4148 on fast acting switches that also have a cap such as roll over switches and pop bumpers?
Right that'd make sense. Can't claim to be an expert on the subject, but imagine in some cases the type of diode plays into what the software expects for de-bounce timing and using a different type that's faster or slower would cause some issues. Really doesn't seem to have much to do with amperage or voltage ratings with solid state switches being low voltage/amperage. Durability under the playfield as Homepin mentioned would also make sense for type chosen.
You're currently viewing posts by Pinsider acebathound.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/difference-between-1n4148-and-1n4004?tu=acebathound and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.