As far as I know, DI uses an ATI 6450 with active cooling. Not easy to find these days. But as mentioned in case of a failure it’s always good to have a spare main oard and graphics card...
You're currently viewing posts by Pinsider ClarkKent.
Click here to go back to viewing the entire thread.
As far as I know, DI uses an ATI 6450 with active cooling. Not easy to find these days. But as mentioned in case of a failure it’s always good to have a spare main oard and graphics card...
The thing with the CMOS battery is a massive drawback. Jersey Jack at least should have provided all BIOS settings that differ from the default ones in the manual.
Does anybody have a list or screenshots of all necessary BIOS setting just in case this happens to DI owners in future again?
Quoted from Pinballomatic:Only one to worry about in most cases is power on after power fail needs to be enabled so it starts every time. In the case of DI sometimes you need to worry about the boot order but usually not.
Can you include all necessary information about the BIOS settings in the manual or at the DI section on your website?
You're currently viewing posts by Pinsider ClarkKent.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/dialed-in-wont-boot?tu=ClarkKent and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.