When reassembling the phone on my game after replacing the display, I was not sure if I should use the cutouts in the display driver board for routing the cables or not. That's what I eventually did, but the vga connector cutout does not align well with where the connector is supposed to go. I also don't like how the black/yellow power connector wire mashes against the inside wall of the phone. I would recommend for anyone to be extremely careful with the grey VGA ribbon cable inside because the white connector is kind of fragile (wires pull out easy). And for some reason the last little bit of seating of the connector required a lot of force, or it would just come apart if the cable moved.

Rob