Quoted from altan:

Now that I've had Dialed In for 2+ weeks, I'd like to tweak a couple of things. I'll start with the phone scoop. Sometimes when the ball shoots out of the phone scoop, it seems to hit the closest wireworm that runs across diagonally.
What's the best adjustment for this?
I'm think I should ever so slightly bend the exposed curve part down toward the playfield.
For all my other Bally/Williams games, I'd just go ahead and do it. But nice Dialed In is "new", I thought I'd get input before trying anything.
... Altan

Quoted from yaksplat:

I did the same thing. It looks great, but I had to put a shield around the camera. There was too much light in the area.[quoted image]

Quoted from Animal:

That's very helpful to know, thanks!

Quoted from waldo34:

Recommendation is a little tape to block the light for better pictures.
[quoted image]

Quoted from Shredso:

That looks great! I was planning on adding some more LED's for the translite, might as well add that while I'm in there. Any idea if it works for Willy Wonka? If you could send the files to [email protected] that would be awesome.
Thanks!

Quoted from Shredso:

Thanks! What orientation/supports did you use?

Quoted from nettek:

Thanks for creating this and sending the STL. It prints and fits perfectly.
[quoted image]

Quoted from SketchyMcDuff:

New to the Dialed In! Club and loving the game! Just picked up some mods from Mezel and having an issue with the Pop Bumper Building, the cable is way too short! It’s about 18 inches long, but as far as I can tell, in order to reach the pop bumper board it needs to be at least another foot. I’ve got an email in to Mezel but wondering if anybody else had this issue? I could do some rewiring myself but I really shouldn’t have to for what this cost...
[quoted image]

Quoted from LTG:

See if a paper clip is attracted to it.
This helps for the ball trough - https://www.marcospecialties.com/pinball-parts/03-16809 they'll likely have it in stock again.
LTG : )

Quoted from Reznnate:

Initially my game had a playfield protector installed and it DEFINITELY messed with the magnet behavior. Once the protector was removed, the game played great.