I have a DI on order, are the balls that come with it so bad that I shouldn't use them?
(Topic ID: 177016)
Linked Games
Dialed In
Jersey Jack, 2017
Topic Gallery
You're currently viewing posts by Pinsider pinball_mutha.
Click here to go back to viewing the entire thread.
2 months later
Does anyone leave the felt off the legs, I found it to be a bit wobbly?
Also I noticed some DI's have a small rectangle box on the top back box that acts like a camera flash, is this something that you can buy or is it supposed to come with the machine?
Thanks!
Hello! I'm not sure if this is an adjustment or something, but it seems like the voice audio during disasters is very very low, is this normal?
Thanks for any help!
Quoted from PinLen83:Haven't experienced any of the above issues. I'm currently running 1.52, and my production date is dec 1. Only thing I had happen was the left opto on the theater fell out of the housing. The right side apparently had the same issue and was hot glued before leaving the factory. Really minor stuff thankfully.
I had the same issue with my opto as well! I put a piece of tape over it to hold it in place.
Quoted from check_switch_26:Which voices? The characters on the phone? If those are the only voices that are low, then you may have an issue with your right channel. Those voices are processed to mainly come out the right-hand side, since the phone is on the right of the game.
Go into Sound Test (Diagnostics->Full Menu->Tests->Sound Test), and play the left & right channel test sounds to check things out.
--Ted
Ok, I did a sound test and nothing was coming out the right speaker, I opened the back panel and wiggled the right RCA connector and it came back on, so it was just a bad connection.
Thanks for the help!
2 months later
Quoted from moonduckie78:Mine doesn't have those weird dots, but it definitely has the brushstroke thing going on.
Mine is the same, both with dots and strokes, I had them send another one and it was the same so I sent it back. I still have my ticket open, as I want to send a picture of what a good one looks like. It will be interesting to see what they do with others that have this problem too.
Quoted from pinball_mutha:Mine is the same, both with dots and strokes, I had them send another one and it was the same so I sent it back. I still have my ticket open, as I want to send a picture of what a good one looks like. It will be interesting to see what they do with others that have this problem too.
Oh I forgot to mention that the rest of the powder coating is glass smooth. It's only the lock bar.
11 months later
Quoted from RipleYYY:did someone know the password to enter the BIOS, or did someone already tried by simply removing the cell ?
If you remove the cell and put it back in, it removes the password.
Promoted items from Pinside Marketplace and Pinside Shops!
Pittsburgh, PA
You're currently viewing posts by Pinsider pinball_mutha.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
