Indianapolis, IN
Can someone explain to me the "story" of Dialed In (or link to it)? Guy finds a phone with special powers from Dialed In Electronics...
(Topic ID: 177016)
Linked Games
Dialed In
Jersey Jack, 2017
Topic Gallery
You're currently viewing posts by Pinsider pin2d.
Click here to go back to viewing the entire thread.
1 year later
Quoted from LTG:Coil stop screwed on tight ? Tiny bit of up/down play on flipper bat ? If you remove the plunger assembly does it wiggle freely ? Coil sleeve cracked or broken ?
Spring looks good and pawl isn't catching on the EOS.
LTG : )
Thanks as always Lloyd for the quick reply, you're the best. The coil stop was screwed on tight, the plunger had some wiggle, I removed the coil, didn't see the sleeve cracked or broken. When I took it off, there is still resistance for some reason...
IMG_1362 (resized).JPG
Quoted from nitrojcrawf:Does the flipper lift up from the playfield? Should move 1/16th of an inch sounds like to tight to the bushing
The flipper is not rubbing on the playfield, it is above it, doesn't have the up and down "play" or wiggle that the other ones do though if that makes sense...
Quoted from LTG:Does the flipper bat/shaft move up and down a tiny bit. So the pawl isn't binding on the nylon bushing the shaft rides in ?
LTG : )
It doesn't seem to move up and down at all.
Quoted from LTG:So the pawl isn't binding on the nylon bushing the shaft rides in ?
LTG : )
How do I check this?
Back in business, thank you everyone!! It was sitting on the nylon bushing apparently. Odd that it just started doing this, but fixed now. Thanks again, I'm off to get to Showdown! (More realistically Chaos in QC 
)
Promoted items from Pinside Marketplace and Pinside Shops!
You're currently viewing posts by Pinsider pin2d.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
