Dialed In
Jersey Jack, 2017You're currently viewing posts by Pinsider marioparty34.
Click here to go back to viewing the entire thread.
What can I do to fix the ball from stopping here? If the ball has enough speed, it will go through, but the clearance seems tight. I tried to adjust the metal pin (I don't know what else to call it) but there is no give. On a slow draining ball, it will just stop and I have to bump the pin for it to fall.
Thank you for your help.
53302331_2025200691115044_8361820860205498368_n (resized).jpgI understand by doing so, there will be more clearance for the ball to drop on its own. Pardon my ignorance, but how do I permanently make the rubber sling more tight on that side?
Quoted from nitrojcrawf:I just got a replacement set. I was also told to make sure to update to newest code. I installed my new ones but have them off cause I didn’t update code yet.
Only one of mine failed. Did all 3 fail for you? How hard/long did it take to replace? I haven't done mine yet.
Quoted from drained:Just setup my first DILE a few hours ago, working on getting it
dialed in This pin has had my attention for a year now.. finally
in my collection.
I am on 1.52 currently.
Does anyone have a link to 1.57 code hosted somewhere ? JJP only
has 1.60+ on their website from what I can tell.
I'd prefer to try 1.57 from the posts I have been reading on
1.60+
IMHO 1.57 is the best version. If you have a drop box or something similar, I can send it to you.
Quoted from Doctor6:Has anyone here NOT taken the mylar off their magnets?
I have not. I haven't had any issues.
Quoted from LTG:Under the playfield. Metal on metal moving parts.
LTG : )
Is there a specific brand/type of lube?
Quoted from EMpins16:Just received my DI LE today . I gotta day my JJP experience has sucked thus far . My LCD is crooked and I can’t seem to figure out how to correct it. The lock for the back glass was broken and I had to remove the speaker panel to get to it . Also the speaker/audio is giving me a ton of static . Is this normal ? Has anyone encountered these issues ? Kinda bummed so far .
For the static, you just need a ground loop isolator. Works like a charm. Here is a link to the discussion.
https://pinside.com/pinball/forum/topic/dialed-in-le-auido-noise
Welcome to the club!
Quoted from EMpins16:Thanks for the info guys ! Appreciate it and nice to hear you are familiar with my issues . My game was made in June 2018 . I’ve read about the audio issue on here a bit . Could the ground loop be a fix for my issue ?
See my response above. It fixed mine. I ordered mine from Amazon.
Quoted from Kenswift:I tried 3 different filters, none have worked.
This one has worked well for me.
https://www.amazon.com/Mpow-Ground-Isolator-Stereo-System/dp/B019393MV2
Quoted from Gogdog:Yeah, what version are those anyway?
They are from pingraffix.
https://www.pingraffix.com/product-page/dialed-in-pinball-mirror-bladeskinz-jersey-jack-pinball
I know people say this all the time, but they really do look even better in person. Lol. I highly recommend them.
Quoted from DeeGor:I tried installing some blades in my machine. Unfortunately there just wasn't enough room to squeeze them in. I really like the look of them.
I was worried about that too, but it actually wasn't that bad with the assistance of my wife. I used the plastic side protectors and shifted the playfield slightly to one side to install the first side. I had plenty of room and then did the same to get the other side. Clearance was actually decent, but I have the assurance of the plastic side protectors too.
I wish Pingraffix made more of these for different machines. It's the best of both worlds having the art of the graphics and the benefit (coolness) of the mirror reflection.
Quoted from DawnP:Those are awesome! We just received our Dialed In last week. Has the plain mirror blades...that thing is real tight getting playfield in and out. Any more thickness on the sides and I don't know if we'd be able to move the playfield. Great playing game though...I still suck at it, but fun.
Congrats! The game is awesome!
Quoted from TOLLS:Invest in a demagnetiser. Money well spent.
Which model do you recommend?
You're currently viewing posts by Pinsider marioparty34.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/dialed-in-owners-and-fans-club?tu=marioparty34 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Pittsburgh, PA