New DILE owner with couple of issues.
First JJP pin 2nd owner

Moving target doesn’t move in test mode. Screws are tight..
Voltage meter used to measure voltage at motor during test mode. No DC voltage present . According to original owner it never worked out of box.

Second thing is additional connectors not used, see pictures

Guessing blue would go to led strip for
Back glass

Thoughts?
Thanks in advance

09F96748-B2C4-4A0E-BB1E-3F2388691100 (resized).jpeg

98313EFD-5EC1-43F8-81C5-385E8CEADF91 (resized).jpeg

I have extra connectors not connected to anything. Shown in pics

Can you compare your connectors to mine shown in pictures?

Appreciate pics of connectors when you get a chance.

Don’t want to connect connectors by guessing.

Everything on moving target underneath PF is connected

Everything is wired correctly.
How do I go about verify relay?
Have the relay been much of problem on DI

Moving target error switch stuck closed.
Would this mean opto switch?
Target switch is open.

0C5C174D-7046-4541-AAF8-73D50913B061 (resized).jpeg

Yes target registers.
Don’t think moving target has ever left home position all the way to the left.

I have loud hum issue.
Do you a part number & manufacture?
Where does it go? Pic?

Thanks

LTG isolated moving target problem to motor /gear box. Gear box doesn’t move. Took gear box apart motor is the issue.

Thoughts on where to buy replacement motor?

JJP sells gear box & motor for $75 other options?

Curious of gameplay improvement by removing cell phone etc protectors .
Does it improve gameplay?
New owner of DILE?