one day my woz will sell so i can get a DI
Quoted from LTG:
Measure the legs, three of the short ones might have gotten into your box. Call JJP to get the right leg or legs.
Door open, please check if the two wires/connectors are on the lower big white switch by the left hand of the door opening. Then be sure the flap on the door fully closes it. Check the area for anything unplugged that should be plugged in.
LTG : )
I'll have to go and measure them again but I am pretty sure 3 of the legs are 30 and 1 is like 32".
I connected the wire to the white switch and when I do, it thinks the door is closed when the switch is not pressed. When I press the switch it thinks it is open. I swapped the wires 6 ways to sunday and is still thinks it's open when it's closed. I'll take a look at it again tomorrow when I am not tired as hell lol.
Got the correct legs in for my game today. Skimmed a few dozen pages back but didn’t find any answers.
What are people putting on protection wise for DI?
Quoted from Nokoro:
When was your machine built? If February or later, you already have authentic cliffys on the SIM and phone scoops. I haven’t added anything else except a small square of Mylar where the ball drops from the subway station. You already have Mylar around the theatre and drone magnets. You will want to cut a circle out of that Mylar right where the magnet sticks up into the playfield. If you look at key posts, there will be a post with instructions for that.
April 18 is my build date. They said I have cliffys when I talked to support but they sure look like the old ones to me
Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside