We are looking to buy step stools for our 4 yo twins to play pinball. We have WOZ but don't have our Dialed In yet. Could someone measure the distance between the legs of their Dialed In 10 inches off the ground so we now how wide apart they are. We only have the wide body WOZ for reference. Thanks.

Thanks

Just got out DILE yesterday and love it. Thanks Joe@PinballStar.

I’ve removed the Mylar over the magnets and moved the BOB sign thus far but do have one question. I’ve had it say it’s taking selfies and that it did take x number of selfies but never see any pictures. The camera is enabled in settings. Also when the lottery ticket is displayed we wave our hand but the ticket is not scratched. Any thoughts as to why the camera seems to not be working?

Yep. Nothing plugged into camera but don’t see anything to plug into it. No stray wire or unconnected connector.

That’s what I assumed possibly but still don’t see it

image (resized).jpg

image (resized).jpg

I’m online checking manual to see color of wire and where it originates from.

Removed the monitor and found it!!! Thanks LTG.

Where should lock ramp/station 3 wire form exit to instead of SDTM? Left or right flipper?

Really like splitting the BOB signs apart and bent the brackets to angle the front sign to read easier.

image (resized).jpg

I’ve had my DILE for a few weeks now but only started having this issue tonight. When I hit left ramp ball comes down wire form, hits end of wire form and instead of dropping into hurry up inlane, it jumps out of the wire form and either into the lite drone inland or onto PF and SDTM
Game is level left to right and set at 6.5. Happens about once every 3 Times I hit ramp or more.
Bend wire form some, place washers under nut to raise up wire form some, wait to see if it continues?

Ok....hopefully my issues with the download to 1.5 are because I’m an idiot and you all can help me because this is driving me crazy. No trouble doing full or delta updates on my WOZ. Tried DialedIn when download first came out with no success and finally had time today to retry. Tried two different Sandisk cruzer 32 YBR drives. Same ones used on WOZ.
Get to a certain point where it say ...c32 already exists....press select all ( I’ve tried all the choices but no difference). It immediately goes to installation complete even though 33% left. Put usb in game and turn on and 1.13 loads up.....tried too many times to admit. Where is my stupidity evident ????? Thanks for the help.

E7C9CAB7-DA29-4681-8FE5-B61491BE7A08 (resized).jpeg

4768DC52-00BF-4DEC-B05C-38319DA5C3C2 (resized).jpeg

768FD9A1-8D76-4810-829D-97F7F6B5A9D6 (resized).jpeg

86D920EB-2B79-467F-A80D-9D548C1A4B0A (resized).jpeg

0737F1AA-1702-4737-B129-F3FBD68F56FE (resized).jpeg

PNY USB drive worked first try! Thanks LTG. I assumed the sandisk was fine since it worked for WOZ. Go figure.

Finally got rid of Bob the Builder-on-a-stick today!!

Not sure where or how I will mount the lightning bolt yet so I just tucked it behind it for now and it wedged in pretty good.

And I’m not sure how my daughters AAU schedule showed up but I couldn’t get it to delete...so now you know where I’ll be at this spring

3E2C9323-3FD3-43AE-9154-4B92A69E4F92 (resized).png

2350632F-2D1C-4E50-B399-0A8A0C54ECA7 (resized).jpeg

20E7F820-DC0B-4148-A016-D3E77FFD30CD (resized).jpeg

My keys for the back box will not unlock the back box. I’ve had it open before so I have no idea what’s going on. The key won’t turn the lock. I’ve wiggled, shaked, twisted to no avail. Only other game I have is WOZ and I tried those keys to see if they got switched but those only unlock WOZ. Any suggestions ?

My topper for now.

EAE45595-EA1B-4E59-A105-D434C60B9A92 (resized).jpeg

Here’s the impact spot on mine. Ugh.

Looks like I need to remove the theater to get that piece out to bend it properly. Which means removing the upper PF I assume

43C69D5E-87DD-4607-A995-052DC3A8872B (resized).jpeg

Was gonna wait for the final update....but mountaingamer’s post has me ready to go update now!!! Just gotta wait for my 17yo and his girlfriend to be done watching a movie so I can enjoy my game room and new dialed in code

D1B94E22-A9DA-44C0-9F6A-FBFDBAE7CA7B (resized).jpeg

I noticed today I have the following LEDs out:
Crazy Bob sign
Train 1 ramp #7-12
Lock ramp #1-6

Any help would be greatly appreciated.