Hello all! I will be joining the group soon. Game will be getting shipped to me Monday. I am very excited to give wonka a proper buddy in the game room haha. Anything I should look out for?
You're currently viewing posts by Pinsider enron64.
Click here to go back to viewing the entire thread.
Hello all! I will be joining the group soon. Game will be getting shipped to me Monday. I am very excited to give wonka a proper buddy in the game room haha. Anything I should look out for?
Just got my dialed in today! Seems like a super cool game. My back button for the menu button doesn’t work however. Checked loose connections but doesn’t seem to be that. Any help would be greatly appreciated.
Quoted from Pinballomatic:Check j601-604 on the I o board behind the monitor - if the head was just folded and unfolded those smaller switch wires can get tugged off or crookedly partially on their pins and those four share a ground wire at pin1 on each connector. Any tension on those harnesses can cause what you are seeing.
That was it! Thanks very much. Noticed a couple of crooked connectors and fixed them.
Quoted from LTG:No.
That is why.
LTG : )
Disclaimer : Former jjp tech support and pinball ambassador.
Thank you very much LTG! Appreciate the knowledge and help.
Has anyone else had the electric guy scratch the glass from underneath. I put a fresh piece of voodoo glass in and noticed scratch marks on the underside of the glass right where his path of travel is. He clears it fine in the test mode. I am wondering if hitting him while he moves causes his bolts to hit the glass.
Quoted from LTG:Are they installed right, not upside down ?
LTG : )
Nope not upside down.
Quoted from aeneas:No, but I have scratches in my glass around that spot from taking the glass out with coin door open..
I normally always close the coin door when sliding the glass off but that being said sometimes I forget. Could be that for sure.
Ok upon further investigation the scratches are perfectly inline with the electric guys lightning bolts. My question is now is he supposed to have play back and forth and side to side or is he supposed to be sturdy. Mine has play so I can imagine that when the ball hits him he moves around a bit.
You're currently viewing posts by Pinsider enron64.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/dialed-in-owners-and-fans-club?tu=enron64 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.