Anyone found any easter eggs in DI (apart from the Red Button)? Cows?
You're currently viewing posts by Pinsider edelhert.
Click here to go back to viewing the entire thread.
I wonder what's the status of the many loose ends as reported in this thread - how about a solution for the issue with the drones being unreliable (not one of my drones is working anymore) - and my ticket to JJP submitted months ago is still unanswered, how about the long awaited software update? Any news guys? Some status update from JJP would be appreciated by many, I suppose.
So am I, and I really enjoy playing the DI. It's already great but probably some enhancements as mentioned in the thread would further improve the playability - happy that there seems to be action ongoing at JJP. Not sure if this was mentioned before, but I would also appreciate some enhancements in the music - a bit more variation, a few more score tunes, etc.
I would recommend to do the upgrade. It's fantastic. You can always downgrade if disappointed (which is unlikely).
Nice improvements. I still notice some out-of-syncs on the phone, but for me, these do not really impact the game quality.
My main complaint is: all my drones are dead, and that does impact game quality. It was a fun effect when they worked during the first few months, but now it's a non-functional section of my machine. This is not related to software version but to component quality. I don't know what to expect, as my support ticket is still unanswered
Quoted from Pinballomatic:You can purchase drones from JJP should you wish to do so.
Well, yes but I would expect this to be fixed under warranty, and who will guarantee that the new drones won't stop working after a few months?
Thanks for your reply - actually I did upgrade to 1.60, 1.61 and 1.71 on the same day these versions were released. I know that the drones are less strongly activated with the new software versions, but my machine was delivered with a 1.5x release so they may have been impacted during the first few months.
Before this ends up being a real issue, I'd like to know from JJP whether future software updates will always be tuned to accommodate both older and newer CPU/motherboard combinations. Now it looks like version 1.60 and up are great for the owners of the newer machines, but maybe less great for the owners of the older machines. Are the older machines at the limit of their technical capabilities?
My DILE has the Celeron processor, I'm on release 1.71, and I see a bit of delay in some of the animations, however these don't impact the gameplay in any way. I don't want to take the risk of replacing the CPU in view of potential side effects and risk of impact with future new software releases by JJP. I wouldn't count on JJP testing future software releases on the entire range of CPU's that readers of this forum have installed. I do expect JJP to fix any observed issues (e.g. the video lags) with new SW releases for the 'original' CPU's. Have to be patient though...
Same here. As a result, ball sometimes returns through quantum theatre in the wrong direction. Will try the needle nose pliers trick recommended by LTG.
Looks like JJP did a pretty good job with release 1.73. Complaints on this forum have dried up - wonder what they are working on right now.
What items are still on our wish list for the next release?
I have a similar issue with two of the Bob target insert LEDs. Both LED's have very weak RED (RED is still showing during the test, but much weaker than usual). As a consequence, during attract mode both BOB inserts light up LIGHT BLUE when all other LEDs in the game are WHITE.
It's not really reason for me to open up the game and find out what's going on, but I hope no other RGB LEDs are about to deteriorate...
Quoted from Kenswift:Well this can’t go without being said, Steve has given me UNREAL support from JJP!! I mean UNREAL! He saw that post, we emailed back and forth and at almost 1AM EST, he had gone into my service ticket and gotten the right part added and getting it shipped out soon! The man is unreal and with that type of service, I’m super confident in JJP!
Thanks for your reply. So, I have submitted a ticket. Let's see what will happen!
Same here...I do have the old CPU and latest code resolved the video problems on the phone. From my perspective, no reason to consider updating the CPU anymore.
Quoted from PghPinballRescue:I can't guarantee it'll help, because I can't see the details of the issue you're having, but we can sell you a new lock and key.
51-005012-02
$8.99 + shipping.
Please put a ticket in at http://store.jerseyjackpinball.com/Support-Form/ if you'd like to purchase one.
I don't know if it is a newer design or if it is different in any way from the one you currently have, but it might be worth a shot.
Regarding the BOB targets, attach a picture or short video showing the issue to the ticket and we'll get you taken care of.
You may need a new DI Left Shots RGB LED Board.
15-000053-13 ($99.99) or 15-000053-03 ($98.99) depending on when your machine was made.
I have a similar issue, where the "red" color in two of the BOB targets is weak, and sometimes off. Maybe it can be resolved by resoldering some connections on the board, but I'm not sure it may make things worse. I was told that the 15-000053-13 board has replaced the older (and less reliable) 15-000053-03 board, and was made by a different supplier. But now I get the impression that I better replace my defective ...-03 board with another, new ...03 board. Can you please give some guidance?
BOB color issue (resized).jpgYou're currently viewing posts by Pinsider edelhert.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/dialed-in-owners-and-fans-club?tu=edelhert and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.