Dialed In
Jersey Jack, 2017You're currently viewing posts by Pinsider coz6.
Click here to go back to viewing the entire thread.
Quoted from TOLLS:Thanks for that.
It cost me around $60 for a board swap on my Hobbit, the problem if you can't do surface repairs is if you have a LED thats come unhooked and shorting to something you will blow the fuse again and then another $60, so like on old school repairs find the source of the issue before sending in the board for repair unless you really like doing repairs or board swaps they just don't blow.
Quoted from FatPanda:New code just dropped v1.73. They must have made some tweaks from beta 1.72. Hopefully it resolves the video lag. I'll have to try it out tonight.
Massive code update! But in all seriousness hope it fixes the issues some of you all are having, my game has not had the Lag problems with Bluetooth removed.
- NOTE: This is a "delta" upgrade, which must be installed over V01.60 or
V01.61 or V01.71
=== Game Code
* display performance enhancements
Quoted from wisemanbba:Hello- trying to figure out best setting for the theatre so it doesn’t drop the ball STM. Any advice? Also, any advice on getting consistency from the phone scoop? Too low and it tends to stay in scoop, too high and has tendency to go STM too.
Also, during the EMP strike, the random
Magnets have a tendency to shoot the ball STM at times. I love the effect but can that be turned down a bit?
Thanks
For me the magic adjustment was in pitch and side to side a slight adjustment made the STM go away or into the very acceptable range.
Quoted from Gogdog:Well, to be honest...if a restart didn't work, I don't think unplugging the cord to the phone is going to do anything either.
It sounds like you might need to hook up a menu control board to the lcd screen. If you are still under warranty, I bet JJP would send you one. If not.... buy a replacement lcd screen directly from aliexpress, which comes with one. Its not a bad idea to buy a replacement lcd screen anyway in case yours fails (which is common) ->
https://www.aliexpress.com/item/4000497063840.html?spm=a2g0o.productlist.0.0.721c562em7maWh&algo_pvid=b9d3bbb9-c9f5-4b46-9078-ca3536c93cff&algo_expid=b9d3bbb9-c9f5-4b46-9078-ca3536c93cff-21&btsid=0ab50f4915863867669754173ed8a4&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_
I have connected a board up to mine (to fix a screen alignment issue), but I don't remember if there was a volume/mute setting or not. I would check for you...but its actually a big pain to hook up the menu control board so I can't do that for you.
Ordered - Yeah I had the phone out of the clam yesterday, what a pain and I did not even hook anything up... nothing about that made me feel good. My hope was to see the volume button. Going to try a code reboot as well, while I wait.
Quoted from Trooper11040:Ok one more question about the lottery scratch off. It says to wave your hand to scratch the ticket yet it doesn’t do anything?
It should - check your camera its a fun feature a guaranteed way to get 2,000 points but a ball drain.
Quoted from altan:Haven't even looked at the steps... if the ramp above it needs to come off... but my gut feeling is it cannot be "that bad."
I also wonder --- and I'm no playfield clear coat guy --- if the fact that our games have had 3+ years to cure even more, the chance of any issue is reduced.
It was sort of easy to remove, I don't think you have to take the ramp off - Its been a long time since I did it and would not look back, even if the area does get damaged it goes into the enjoy the game and take the few bucks off when you sell...
Quoted from ripit:that is not bad on the price. My screen gets flaky every now and then.
I purchased this screen and board combo from Wish no issues with it - got some on e-bay and no no no
You're currently viewing posts by Pinsider coz6.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/dialed-in-owners-and-fans-club?tu=coz6 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Louisville, KY