(Topic ID: 177016)

Dialed In Owners and Fans Club


By goren1818

2 years ago



Topic Stats

  • 9,404 posts
  • 509 Pinsiders participating
  • Latest reply 1 hour ago by branlon8
  • Topic is favorited by 178 Pinsiders

You

Linked Games

Topic Gallery

There have been 1,129 images uploaded to this topic. (View topic image gallery).

20191021_113236 (resized).jpg
20191021_112022 (resized).jpg
20191021_113142 (resized).jpg
20191021_113136 (resized).jpg
20191021_111744 (resized).jpg
20190818_112830 (resized).jpg
20190818_112853 (resized).jpg
5CC58065-A49F-4026-88D4-6BCA684A9937 (resized).jpeg
DITrap (resized).JPG
97E55CF6-7B4D-48F8-A538-ED978827C7DA (resized).jpeg
91A790A6-A8F0-4357-A429-8A34B2B071B1 (resized).jpeg
2FA68F6F-FF94-4B2D-A3DE-3996F2A6E843 (resized).jpeg
Rubber (resized).jpg
Cliffy2 (resized).jpg
Cliffy1 (resized).jpg
Cliffy3 (resized).jpg

Topic index (key posts)

22 key posts have been marked in this topic, showing the first 20

Post #1 Welcome to the club Posted by goren1818 (2 years ago)

Post #14 Game play video. Posted by solarvalue (2 years ago)

Post #800 What happens if you don't cut mylar off magnet core posts Posted by crwjumper (2 years ago)

Post #805 Cut mylar off magnet posts at drones and theatre Posted by cooked71 (2 years ago)

Post #1026 Ball adjustment for tilt Posted by vireland (1 year ago)

Post #1079 Adjustment for flipper that feels "clunky" Posted by spida1a (1 year ago)

Post #1128 Left inlane post does NOT need a rubber sleeve! Posted by Mageek (1 year ago)

Post #1151 Adjusting the kickback Posted by pinstadium (1 year ago)

Post #1246 Another ball trap location Posted by Vyzer2 (1 year ago)

Post #1253 Velcro fix for right ramp hangup Posted by cooked71 (1 year ago)

Post #1258 Detailed pictures for adjusting a misbehaving trap door Posted by foobeer (1 year ago)

Post #1332 Getting access to computer in backbox on Dialed In Posted by hank527 (1 year ago)

Post #1347 Ball trap location. Posted by Kevlar (1 year ago)

Post #1377 Fix for USB at the coin door not working Posted by Pinhead1982 (1 year ago)

Post #1391 Fix for Tilt Bob not working all of a sudden Posted by vireland (1 year ago)

Post #1431 Adjustment point to grease for trap door to operate smoothly Posted by LTG (1 year ago)

Post #1451 Adjusting arm on Quantum Mechanic Posted by vireland (1 year ago)

Post #2507 How to get in backbox to check audio connections Posted by pinstadium (1 year ago)

Post #2661 DIY Lighting how-to for sides of Dialed In backglass Posted by lyonsden (1 year ago)


Topic indices are generated from key posts and maintained by Pinside Editors. For more information, or to become an editor yourself read this post!

You're currently viewing posts by Pinsider boostedskex.
Click here to go back to viewing the entire thread.

#2078 1 year ago

I'm finally in! Just purchased a DILE. Such a great game, but I am having a few issues that I need help with. I have read this entire thread and worked on the theatre magnet and a few other little fixes to help the game. It has 1.52 code and the levelers all the way down.

The first issue I am having is that the ball is bouncing off of the left wire form ramp when the ball gets to the inlane. It bounces off and sometimes behind flipper. This is driving me crazy. I tried washers under the wire form and adjusting the placement with no success. I read another owner was having the same problem and JJP is sending him a new ramp.

The other thing I am noticing is that after I plunge the ball the auto kicker will kick 2 times after any switch is hit. Is this supposed to be happening?

#2080 1 year ago
Quoted from LTG:

? Do you have your game level left to right, and around a 6 1/2 degree pitch for the playfield ?

No. Check the shooter lane switch. It might be sticking or binding in the slot it travels through the playfeld in.
LTG : )

Great diag LTG! The switch was slightly touching the side of the slot. Tweaked it over and it stopped. I am using the PinGuy app and it is reading level and at 6.5 degree.

Thanks,
Alex

1 week later
#2189 1 year ago

I am still having the left ramp problem. If the ball doesn't bounce off of the ramp it hits the end of the ramp and goes back up the ramp a an inch or two. I have watched videos of many other DI's and I see the ball drop in the hole as soon as it gets there. Mine is playable but really frustrating. I have leveled, tweaked and tried every other trick I have seen people post about without a resolution. I know at least one person with the same problem is getting a new wire form ramp to correct this problem. Should I submit a ticket and contact JJP about this? I do not want to "bend" it to fix it.

#2191 1 year ago
Quoted from Oldgoat:

Mine hits and almost always bounces up some and maybe rolls up the ramp a bit. It then falls through as it should. Now, on occasion, it bounces up and over the slings as a drain. I've contacted JJP about the plastic that is supposed to prevent this. I'm unclear what your issue is with it rolling back up a tad. Does it not fall through the hole like it should?

sometimes it bounces off completely and the rest of the time it hits the end and bounces back up the wireform and then falls through as it should. That just doesn't seem right to me. I watched as many videos as I could of other machines and I am not seeing that happen. It did not happen on the machines I played at shows either.

1 week later
#2365 1 year ago
Quoted from snaroff:

Just added a post/poll based on some of the wireform discussion in this thread.
https://pinside.com/pinball/forum/topic/dialed-in-wireform-design
snaroff

The issues in your poll have been so frustrating for me!

9 months later
#6097 11 months ago

I emailed Jen to get the code on Saturday night and I still havent heard back. Anyone have a real release date yet for the 1.56 code?

#6100 11 months ago
Quoted from mountaingamer:

Why not call Jen and have her get you access?

It seemed like the group was saying to email her. I did that but havent heard back

Promoted items from the Pinside Marketplace
Trade
Machine - For Trade
Chatham, MA
From: $ 20.00
Cabinet - Other
Rock Custom Pinball
$ 21.00
7,650 (OBO)
Machine - For Sale
Bridgewater, MA
From: $ 24.00
$ 9,000.00
From: $ 20.00
Cabinet - Other
Rock Custom Pinball

You're currently viewing posts by Pinsider boostedskex.
Click here to go back to viewing the entire thread.

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside