(Topic ID: 177016)

Dialed In Owners and Fans Club

By goren1818

2 years ago

Topic Stats

  • 9,381 posts
  • 508 Pinsiders participating
  • Latest reply 21 hours ago by bigd1979
  • Topic is favorited by 178 Pinsiders


Linked Games

Topic Gallery

There have been 1,124 images uploaded to this topic. (View topic image gallery).

20190818_112830 (resized).jpg
20190818_112853 (resized).jpg
5CC58065-A49F-4026-88D4-6BCA684A9937 (resized).jpeg
DITrap (resized).JPG
97E55CF6-7B4D-48F8-A538-ED978827C7DA (resized).jpeg
91A790A6-A8F0-4357-A429-8A34B2B071B1 (resized).jpeg
2FA68F6F-FF94-4B2D-A3DE-3996F2A6E843 (resized).jpeg
Rubber (resized).jpg
Cliffy2 (resized).jpg
Cliffy1 (resized).jpg
Cliffy3 (resized).jpg
20191003_181551 (resized).jpg
ScreenJJP (resized).jpg
showdown (resized).jpg
25389D20-1022-4992-9032-DC58F7E0D621 (resized).jpeg
E0A0B586-7AF4-483C-9C4B-D556087D9FF7 (resized).jpeg

Topic index (key posts)

22 key posts have been marked in this topic, showing the first 20

Post #1 Welcome to the club Posted by goren1818 (2 years ago)

Post #14 Game play video. Posted by solarvalue (2 years ago)

Post #800 What happens if you don't cut mylar off magnet core posts Posted by crwjumper (2 years ago)

Post #805 Cut mylar off magnet posts at drones and theatre Posted by cooked71 (2 years ago)

Post #1026 Ball adjustment for tilt Posted by vireland (1 year ago)

Post #1079 Adjustment for flipper that feels "clunky" Posted by spida1a (1 year ago)

Post #1128 Left inlane post does NOT need a rubber sleeve! Posted by Mageek (1 year ago)

Post #1151 Adjusting the kickback Posted by pinstadium (1 year ago)

Post #1246 Another ball trap location Posted by Vyzer2 (1 year ago)

Post #1253 Velcro fix for right ramp hangup Posted by cooked71 (1 year ago)

Post #1258 Detailed pictures for adjusting a misbehaving trap door Posted by foobeer (1 year ago)

Post #1332 Getting access to computer in backbox on Dialed In Posted by hank527 (1 year ago)

Post #1347 Ball trap location. Posted by Kevlar (1 year ago)

Post #1377 Fix for USB at the coin door not working Posted by Pinhead1982 (1 year ago)

Post #1391 Fix for Tilt Bob not working all of a sudden Posted by vireland (1 year ago)

Post #1431 Adjustment point to grease for trap door to operate smoothly Posted by LTG (1 year ago)

Post #1451 Adjusting arm on Quantum Mechanic Posted by vireland (1 year ago)

Post #2507 How to get in backbox to check audio connections Posted by pinstadium (1 year ago)

Post #2661 DIY Lighting how-to for sides of Dialed In backglass Posted by lyonsden (1 year ago)

Topic indices are generated from key posts and maintained by Pinside Editors. For more information, or to become an editor yourself read this post!

You're currently viewing posts by Pinsider at_t_2d.
Click here to go back to viewing the entire thread.

#2159 1 year ago
Quoted from ChipScott:

Awesome! Question for you, was this a new machine from the factory, or was this from a previous owner? If this was a new Factory delivery, would you mind if I ask a few questions...
Any issues at all? Did it come .....

I received mine on 12/21 with a 12/5 production date and I have put over 100 games on it so far. It came with code version 1.52. The only issue was the connector for the start switch had come off in shipping and I had to snap it back on. I do not have the plastic at the end of the left wire form. I am not sure why it would be there, I have not had any issues with the ball not following the wire form. The playfield protector under the clock is a bit too thick and does cause the ball to hit it and reject - I have a set of Cliffy's on order. This is an awesome game, so glad I cancelled my GotG order and bought DI instead.

#2254 1 year ago

Is there an adjustment for the lockdown bar? I am having trouble getting the handle to move to the right. If I leave the glass out and push down hard on the bar I can get it to latch. I loosened the bolts on the receiver that is bolted to the front of the cabinet and there really wasn't any play to move it higher. I wanted to check here before taking a file to the notch in the bar itself.

#2327 1 year ago
Quoted from lyonsden:

Just realized I'm missing the shaker during game play.....

I thought the same thing. Found out mine wasn't actually plugged in.

1 week later
#2391 1 year ago

Check to see if the lightening he is holding is flipped. It is not symmetrical and will hit balls on that ramp if installed backwards.

#2508 1 year ago
Quoted from JayLar:

Hi all! Just got a Dialed In Standard Edition and the start button assembly was hanging loose inside. I can't make it stick in the hole where it's supposed to be. See image where I've put it in the hole. Is there any parts missing?

I got mine about a month ago and it was the same way. Just push it in with a little twist to make sure it is lined up and it should snap in to place. Double check that your shaker is plugged in as well. I didn't notice that for a week or so. It is like whoever was doing final assembly on that corner of the cabinet dropped the ball.

#2634 1 year ago
Quoted from JayLar:

Has anyone installed pinblades on their Dialed In? I'm considering Pingraffix blades or mirrorblades. Pictures are very appreciated!

I bought a set but upon closer inspection I don't think there is enough clearance between the playfield and the cabinet on mine.

3 weeks later
#2946 1 year ago

Cliffy update - I ordered a set on 12/20/17 and they shipped yesterday.

1 month later
#3275 1 year ago

If you are starting a waiting list, please add me for a topper for a standard.

Promoted items from the Pinside Marketplace
Machine - For Trade
Chatham, MA
From: $ 18.00
Apparel - Men
Pinside Shop
$ 239.00
Cabinet - Toppers
$ 2.50
Playfield - Protection
Pinball Mod Co.

You're currently viewing posts by Pinsider at_t_2d.
Click here to go back to viewing the entire thread.

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside