You're currently viewing posts by Pinsider Marcdaddy.
Click here to go back to viewing the entire thread.
Guys real quick, just noticed static noise from the speakers. N.i.b. last night and had it immediately, any fix?
Quoted from Pinballomatic:Email [email protected] and request a ground loop isolator. Easy install, no soldering or anything like that; it will knock out the static noise.
Thanks!!!
When entering the Menu for the first time my Green/Escape button inside of the coin door is not registering. All wiring looks fine. Hete is a video I shot of it. Again I'll contact jjp support.
Quoted from LTG:Check the connector for the coin door switches right inside the coin door. Reseat, push connectors/wires together real tight, be sure no wire or pin is sticking out of the connector.
LTG : )
Thanks Lloyd, tried that to no avail. Only other thing I could see is to unscrew the 2 screws holding the assembly together?
Quoted from LTG:Be sure no broken wires to the switch lugs or switch lugs shorting to metal.
LTG : )
Ok, I'll check again later.
My sound is all staticy and jjp sent me a noise filter. Question how do i get the moniter out of the way? Looks like 2 screws on either side of it. I thought it would swing out or something but it's in there solid.
Quoted from LTG:In small wooden blocks ? Loosen, turn the block. Then this -
Once the wood block is turned, pull the latches up. When finished, I would turn the wooden block and retighten the screw. So the latches are locked down.
LTG : )
Here's is what I got.
Do loosen screws?
You're currently viewing posts by Pinsider Marcdaddy.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/dialed-in-owners-and-fans-club?tu=Marcdaddy and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.