Hi, just picked up a Dialed In ..love it!

A few questions though..

1) I am used to pushing the back leg levelers all the way up and then adjusting down. This game I have a legs all the way down and it's still above the third bubble line when it should be at 2...so I need the actually raise the front?

2) maybe because I am not level so I got a ball stuck at upper level. But looking at the protector, looks like a real ball trap...is this how the clear plastic piece is supposed to look? Thanks!!

20190608_211057 (resized).jpg

20190608_213945 (resized).jpg

20190608_213927 (resized).jpg

Thanks Lloyd,

Might you know what to do about this? Got the kickback for first time during multiball and noticed the ball sitting...upon further review the coil is beyond the apron. Trying to take off the apron but the coil has it wedged in there tight so after screws come off you can't slide the apron up...any ideas? I am afraid to force it and scrape the playfield...tx

20190608_215302 (resized).jpg

20190608_220042 (resized).jpg

20190608_220219 (resized).jpg

Thanks again...was able to work it off, loosen and adjust bracket to straighten it out...but when I try to put the apron back on it doesn't slide back on without forcing..and the bracket doesn't have more play to push it back.

So looks like when the apron is screwed back on it will crush the corner of the coil and probably that's why when it fired it squeezed out in front of the apron.

Is the apron supposed to be hard pressed against the coil? If not, looks like I can't screw the left side all the way back together or I need to make the notch in the playfield a little bigger so I can slide back the bracket about 1/32" - 1/16" ... Ug.

20190608_225215 (resized).jpg

20190608_225058 (resized).jpg

Got it all back together and the kick back is working for now but it seems like the apron is too far back or the kickback bracket is too far forward because I have to really force it.

Does this look correct and you are supposed to see the wood or is the apron supposed to be further up?

20190609_081028 (resized).jpg

20190609_082817 (resized).jpg

Thanks...was a pain to find that picture and I just found 2 or 3 searching the picture gallery for this thread ..forgot you can do that on pinside.

Thanks again...

Man this is such a GREAT game!

I was in the same boat. Looking to get a new pin...went from Munsters to Wonka and both had issues for me...so I "settled" on DI. Best NIB purchase I ever made. It's funny, I played the game at shows and it always flipped well but I could not get the theme integration and I was missing a lot with sound drowned out at shows.

This game is literally "dialed in" and polished in every way. Aside from the weird art decision to put a no emotion dude with the phone in his hand I really like everything about it. Has that Lawler flow, feel, humor and the build quality is amazing. Fun, fully developed game....and it looks so much better in person than in pics.

I am considering whether or not I should wait on the upgrade...do you mean when Bluetooth is removed it solved the lag issue or it is just not as bad? I don't think I will ever use the app so that would be something I would try if it fixed the issue people are having...thanks.

Question - anyone decapitate a dialed in? I need to move it and it weighs a ton. Hobbit was not too bad but I know the CPU is in the head now...would it be easier? Harder? Anyone post a step by step yet? Thanks

So is there any secret to removing the head ( are there major disconnects in the harness for example) or do I just have to remove all the connectors in the head like I would a WMS game?

I just thought my Hobbit was fairly simple to pull out the playfield and a shame if DI is not easy.

20190807_122405 (resized).jpg

20190807_122447 (resized).jpg

20190807_171449 (resized).jpg

20190807_122351 (resized).jpg

Thanks

Lol..thanks. was hoping I was missing something.

For the record, I thought the Hobbit was a move in the right direction. We are all getting older and moving these heavy games is getting dangerous, adding a connector in the middle of the harness would be welcome addition. After moving a JJP game around moving a Stern is like bag of groceries..

Hello all. Been a while but about a year or so ago there was an update that was making the cell phone video glitch and people with older CPUs were updating them to get back to smooth video.

I simply didn't update software thinking a fix would come out. Did one?

So question is, is it safe to update to latest software for older games? If not, how do I figure out if I have an old or newer cpu (what version is safe?) Thanks.