Dialed In
Jersey Jack, 2017You're currently viewing posts by Pinsider BladeFury.
Click here to go back to viewing the entire thread.
Quoted from delt31:anyone sell mirror blades for this game yet? Also - which there appear to be two active threads for owners:
https://pinside.com/pinball/forum/topic/dailed-in-by-jjp/page/26#post-3981122
Yep mine are on! Www.pinballsidemirrors.com
Same as WIZ and Hobbit!
Out of like 15 pinball machines I've had my wife and kids only plays them a couple times and then pretty much don't play them anymore.....she played for an hour on my Dialed In CE and can't get enough lol "It's just fun" are her words. I think it is hilarious that a non licensed Theme hit it out of the park for my family! So glad I didnt get all caught up in the early drama about the Theme and the game.. "Fun" is what it's all about and keeps you wanting more. I buy these games mostly for myself but nothing beats setting back watching family & friends play and have "FUN"! Thanks again JJP & Pat for such a great game and a home run! Joe at Pinballstar your the best man!
If your on the fence don't be its incredible! If your family is part of the decision, I had the great game WOZ ECLE and they like this A LOT more.....
Quoted from delt31:OK so you bought these then?
https://pinballsidemirrors.com/product/pinball-side-mirrors/
and you didn't have to do any mods to it to make it work? Best approach to install?
Yep JJP ones! No mods..easiest is to start with taking the the side back box bracket bolt out then install that back in thru the mirror blade first then work your way down towards the coin door to get it lined up nice. The screws for for the blades need to be put in straight so it's as flat as possible to give clearance for playfield . Good luck!!
Quoted from Rdoyle1978:Finally did the budget and DI is in sight!!
Anybody know if I order now (say from my closest distro, PinballSTAR), how long before it ships?
Call Joe probably not long!
Yep have the same small scratches in same area after about 200 games...wax took them out and ordering new balls as they already look pretty beat up...it's just part of pinball and keeping an eye on things 
I also use a small battery powered leaf blower to blow the play field off to make sure any small metal particles from ramps and such aren't setting on the play field before I wax lol
Quoted from pinstadium:The clear bands sounds like they would look really good with the playfield. Can you post up some pictures of what it looks like ?
Did clear when got mine and love them but I like them on all JJP pins I've had....like how it lets light thru them..
500 plays with JJP protectors and changed to Cliffys last night. Everybody has an opinion and mine is that phone scoop shot is way better now!! Not to mention looks way better. Just personal opinion but JJP shouldn't have tried to re invent and just worked something out with the professional Cliffy!!!
Quoted from Bigbossfan:Yes we did that. But looks like Frank (JJP Support) and I figured out the problem. Just spent over an hour on the phone with him trouble-shooting.
Wasn't the IO board at all. Don't know how we ended up checking connectors around the ball trough but when I wiggled the wires machine started acting funky. Aha moment. So, there is the one connector coming off the ball trough, it's about 5 inches long, then plugs into another connector. Apparently JJP has been having issues with this one. Frank said that the errors I was having masked that this could be the root cause of it.
All this to say, pin is working for now, but they're sending me out a replacement connector. Hopefully no one else runs into this issue, but if they do....now you know the cause!
Awesome to hear! Frank is The Man!
Quoted from OnTheSnap:Thanks for the support guys! Looking forward to this game room addition, and learning pinball.
8 years playing pool (played in the US Amateur), and sadly no room for a pool table. But I love kinetic shot making sort of games, and really like the technology found in the new tables. So hoping for a new addiction.
Awesome! You'll love it, "hoping for a new addiction " soon you will think back to that comment and laugh because you'll have more than 1 pin in a hurry
I personally think it's just balls beating the heck out of the metal protectors then screwing up balls. My CE did it and I did a fresh buff, wax, new super Shiny balls, and new cliffy protectors no problem since...
New playfield??? Really??? Not a chance...little elbow grease and some new parts by a pinball machine owner are always expected no matter how new or old it is...
Quoted from Damien:DO NOT use the plastic Pinguard type protectors unless you want to see that cabinet fold up like a Shar-Pei!
I have no issues with plastic protectors that have LEDs in them...but probably because both my machines have Rad-Cals....
Quoted from Magic_Mike:Mad Respect!
That shit is sick!!!
Thanks!!
Quoted from Damien:Anyone have this happen before? On boot up the phone also says "auto config" which I don't recall seeing before.
The first time that it happened I just rebooted the machine and it resolved itself. And now it's had this red screen for the last 3 boot ups.
Yes put in a call to JJP after checking connections...mine went pinkish and new display fixed it...
You're currently viewing posts by Pinsider BladeFury.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/dialed-in-owners-and-fans-club?tu=BladeFury and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Fort Wayne, IN